Detention Center Cooling Tower Rebuild

2026-11-03

• Mobilize and set up jobsite . o Complete necessary site access procedure for the Detention Center . o Contractor staging area onsite shall include 3 parking spots adjacent to the cooling towers . o Receive materials upon delivery . Factory components may ship directly to the job site prior to contractor ’ s arrival . Contractor responsible for offload of the materials upon delivery , storage protection and stage at the site . o Contractor shall provide the jobsite dumpsters for proper disposal of materials . • Fill , Air Inlet Louver , and drift eliminator material replacement o Remove the existing scaled PVC fill material and fill supports from the cooling towers . o Once the material has been removed from the tower , pressure wash the entire interior of the cells ( including basins ) to remove heavy bio growth , sediment , and algae . o Mineral scale removal to the extent that it can be removed without producing damage to the underlying substrate . Any damage to existing materials to remain must be repaired or replaced by the contractor . o Place the old fill material , debris , and trash into job site dumpsters that are provided by the contractor . o Furnish and install new original equipment manufacturer ( OEM ) BAC Versacross fill material with an integral louver and integral drift eliminator design . Include new galvanized fill support brackets and support bars . o Install via manufacturer installation instructions . • Water Baffles Replacement o Remove the existing deteriorated water baffles ( located above the fill material ). Place the deteriorated material into job site dumpsters for disposal . o Furnish and install new hot dip galvanized OEM water baffles . o All hardware and fasteners shall be stainless steel . • Structural Corner Column Replacement o Remove the ( quantity 1 ) heavily corroded / deteriorated structural corner on the East Cell . o Place the deteriorated structural corner column into the job site dumpsters for disposal . o Furnish and install a new hot dip galvanized structural corner column to match the original equipment construction . o Includes new stainless - steel hardware and fasteners .

North Carolina

2026-05-05