Eisenhower State Office Building 3rd Floor East Remodel - OFPM

2026-11-03

1 . GENERAL FLOOR PLAN NOTES – REVIEW FOR YOUR PROJECT ALL ARCHITECTURAL FLOOR PLAN DIMENSIONS ARE TAKEN FROM THE FACE OF CONCRETE , MASONRY , OR FINISHED DRYWALL UNLESS NOTED OTHERWISE . 2 . FIELD VERIFY ALL DIMENSIONS PRIOR TO BEGINNING ANY WORK ON SITE OR ON CRITICALLY DIMENSIONED ELEMENTS . 3 . FURNITURE LOCATIONS SHOWN ON PLANS ARE FOR REFERENCE ONLY . OWNER AND VENDOR WILL PROVIDE FURNITURES ; FIELD VERIFY FINAL PLACEMENT WITH OWNER AND VENDOR . 4 . ALL CUBICLES AND DEMOUNTABLE WALLS WITH DOORS AND GLASS ARE CONSIDERED FURNITURE AND ARE PROVIDED AND INSTALLED BY THE OWNER ’ S VENDOR . 5 . WHERE NECESSARY DIMENSIONS ARE NOT EXPLICITLY SHOWN , CONTACT THE ARCHITECT FOR CLARIFICATION . 6 . ALL MATERIALS , FIXTURES , FINISHES , AND COLORS TO BE SELECTED BY THE OWNER AND ARCHITECT . WHERE COLOR , FINISH , OR TEXTURE IS NOT EXPLICITLY INDICATED , CONTACT THE ARCHITECT FOR DIRECTION . 7 . NEW DOOR AND FRAME IN GYP WALL TO MATCH MATERIAL AND HARDWARE TO EXISTING . VERIFY MATERIAL , STYLE , AND COLOR WITH OWNER . 8 . PROVIDE AND INSTALL DOOR KICK PLATES AT HIGH - TRAFFIC DOORS ; VERIFY WITH OWNER . 9 . INTERIOR DOORS TO BE LOCATED 6 " FROM ADJACENT WALL FRAMING UNLESS OTHERWISE NOTED . 10 . NO WALL FINISH IS REQUIRED BEHIND CABINETS , CHALKBOARDS , TACKBOARDS , ETC ., UNLESS WALL BEHIND IS EXPOSED TO VIEW . 11 . CONTRACTOR SHALL VISIT THE SITE AND BECOME FAMILIAR WITH EXISTING CONDITIONS PRIOR TO COMMENCEMENT OF WORK . VERIFY ALL EXISTING CONDITIONS , DIMENSIONS , ELEVATION HEIGHTS , CONSTRUCTION DETAILS , AND BUILDING SYSTEMS IN THE FIELD BEFORE PROCEEDING . 12 . CONTRACTOR SHALL NOTIFY THE ARCHITECT OF ANY DISCREPANCIES BETWEEN THE CONTRACT DOCUMENTS AND EXISTING CONDITIONS BEFORE PROCEEDING WITH THE WORK . 13 . NEW INTERIOR PARTITIONS SHALL BE CONSTRUCTED OF 5 / 8 " TYPE ' X ' GYPSUM BOARD ON 2x4 STUDS @ 16 " O . C ., WITH 3 1 / 2 " BATT INSULATION TO UNDERSIDE OF STRUCTURE , UNLESS OTHERWISE NOTED . 14 . ALL PENETRATIONS THRU GYPSUM BOARD PARTITIONS EXPOSED TO VIEW SHALL BE TRIMMED NEAT AND TRUE AND SEALED WITH ACOUSTIC OR FIRE CAULK . 15 . FURNISH AND INSTALL ALL BLOCKING AND REINFORCEMENT REQUIRED FOR WALL , FLOOR , OR CEILING - MOUNTED ITEMS , INCLUDING THOSE BY OWNER OR OWNER ’ S VENDORS . 16 . ALL PENETRATIONS THROUGH FLOORS , FIRE - RATED WALLS , OR SMOKE PARTITIONS SHALL BE PATCHED AND SEALED TO MAINTAIN THE EXISTING FIRE - RESISTANCE OR SMOKE INFILTRATION RATING . ALL SLEEVES , WIREWAYS , CABLE TRAYS , PIPES , AND DUCTWORK MUST BE SEALED PER CODE TO PRESERVE RATED ASSEMBLY INTEGRITY . 17 . GENERAL CONTRACTOR SHALL COORDINATE ALL MECHANICAL , ELECTRICAL , AND PLUMBING WORK WITH THE MEP CONSULTANT . 18 . THE GENERAL CONTRACTOR ( GC ) IS ADVISED THAT THE BUILDING OWNER WILL CONTINUE TO CONDUCT BUSINESS THROUGHOUT THE COURSE OF THE WORK . ( GC ) TO MINIMIZE LOUD OR DISRUPTIVE PERIODS OF THE WORK AND TO EXECUTE ALL LOUD AND DISRUPTIVE WORK TO OFF HOURS OR OTHER TIMES AS APPROVED BY THE OWNER . ADVISE THE OWNER A MINIMUM OF 24 HOURS PRIOR TO ANY DISRUPTION OF UTILITIES . 19 . ALL DEBRIS , RUBBISH , AND OTHER MATERIALS RESULTING FROM DEMOLITION ARE TO BE DISPOSED OF IN A CONTRACTOR PROVIDED TRASH CONTAINER . TRANSPORT AND LEGALLY DISPOSE OF MATERIALS OFF - SITE . DEMOLITION WORK SHALL REMAIN SAFE AND CLEAN FOR THE BUILDING OCCUPANTS AND CONSTRUCTION WORKERS . OCCUPIED AREAS ADJACENT TO THE PROJECT WORK AREAS SHALL BE KEPT CLEAN AT ALL TIMES DURING THE WORK .

Kansas

2026-04-08