Electrical Work at the Bridger Plant Materials Center , Bridger , Montana

2026-11-03

Please see Attaachment 1 Statement of Work for further detailed description of services . This work is for the United States Department of Agriculture - Natural Resources ConservationService ( NRCS ) Bridger Plant Materials Center ( PMC ), located at 98 South River Rd ., Bridger , MT59014 - 9718 . The work is to run three - phase power from the main distribution panel to a subpanel , topower an existing outlet for charging a forklift and to install a new connection for the newwalk - in seed cooler . The Contractor shall : Install conduit on the exterior of the building from the main distribution panel ( MDP ) unit to theinterior wall behind the walk - in cooler , an approximate distance of 65 feet ( from the 100amp panelto the disconnect of the cooler is a total of 25 feet ). The exterior wall is tin with insulationand osb / plywood ; interior walls are tin with insulation . Install a 100amp three - phase service feedfrom the MDP to a new 100amp three - phase panel located next to the existing electric forkliftreceptacle . Conduit raceway will be metal EMT and Wire conductors will be copper THHN . Remove the forklift breaker from the outdoor MDP and install a new 100amp Three Phase breaker inplace . Re - feed the forklift disconnect out of the new 100amp sub panel to the existing forkliftreceptable , installing new solid conduit , wiring , and receptacle if required . Subpanel is 3 feetfrom the forklift . Provide for electrical wiring of the Walk - in Cooler . Install a surface mount conduit from the newThree Phase sub panel to the Walk - in Cooler area . Install a service disconnect switch for theWalk - inCooler . Wire from the service disconnect to the already pre - wired control panel located on theWalk - in Cooler . Note : Start up and testing of the Walk - in Cooler to be done by a separate HVACContractor provided by the owner . Dispose or recycle all materials removed from the site . Clean all spaces associated with the work . Timely completion of deliverables is essential to a successful outcome . All work must be completedwithin 30 calendar days of the contract being awarded . All the materials and work required and performed by the contractors must be warrantied for oneyearfrom the date of completion of the project .

Montana

2026-04-29