Electronic Gate Maintenance - San Diego County

2026-11-03

Contractor shall perform quarterly maintenance and check overall operation of gates , furnishing new parts , materials , and supplies , including , but not limited to belts , cleaning chemicals , oil , grease , cleaning rags , switches , batteries , fluids , and fuses . 1 ) Contractor shall inspect the motorized gates for excessive wear or stress , lubricate all moving parts , tighten drive chain on gate , and set limit switch , including , but not limited , to the following : a ) Oil or grease bearing and chain . b ) Check clutch and adjust as needed . c ) Check belts for excessive wear . d ) Check and tighten hinges or rollers as needed . e ) Check brackets for secure mounting . 2 ) Contractor shall inspect operator / motor and clutch mechanism for wear and adjust to manufacturer ’ s operating specifications . 3 ) Contractor shall inspect gate operator / motor backup batteries ( if applicable ) and remove old and install new batteries , if required , upon prior written approval from Caltrans Contract Manager . 4 ) Contractor shall inspect gate operator , remove debris , check all electrical parts and wiring , including , but not limited to , the following : a ) Check electrical connections . b ) Check all safety devices for proper operation . c ) Check overall operation of gate operator ...

California

2026-05-10