EMERGENCY GENERATOR AND TRANSFER SWITCH PREVENTATIVE MAINTENANCE

2026-11-03

A . Basic Service scope of work is to be performed as stated below and provided on scheduled visits . B . Lubricating System 1 . First inspection change oil and filters annually ( all new filters will be marked with installation date ) 2 . Approximately 180 days after first inspection , perform complete oil analysis and provide written report to Physical Plant Director , within 14 days after inspection . 3 . Lubricate all fittings . 4 . Check and report all leaks . C . Fuel System 1 . Change fuel filters elements annually . 2 . Check generator set for fuel leaks . 3 . Adjust and clean injectors annually . 5 . Check operation of fuel transfer pump and check for leaks . 6 . Check float switch on day tank . 7 . Inspect Main Tank / Day tank fuel levels . 8 . Inspect and test all pressure regulators on propane , natural gas fueled units . 9 . Inspect governor linkage . 10 . Visually Inspect containment basin . 11 . Check for contaminated fuel in above ground and inside day tank ( s ). 12 . Where fuel oil being used , once per year perform a basic fuel analysis with results and interpretations of results provided to the Facilities manager within 14 days of the sample being taken . Basic fuel test to consist of the following items : Sulfur Content , Biodiesel Content , Karl Fischer Water , Particle Count , Elemental Analysis , Microbial Growth , Visual Inspection .

Indiana

2026-04-08