logo

Fence - Gate Installation - Crossville TN

Sector: Rail • Location: Tennessee, United States of America

Source: Tennessee Purchasing Group

Tender
Closed

Security Fence Approved Model – Ameristar Impasse II – Gauntlet Style or written approved equal , must provide spec sheets at time of bid if another manufacturer is used . - Install approximately 445 LF of 7 ’ tall security fence - Three - rail design - 2 . 75 ” wide Pales - 11 ga rails - 12 ga I beam posts ,

Status
Closed
Sector
Rail, Steel, Commercial, Cement, Residential, Road
Location
Tennessee, United States of America
Updated
3 Nov 2026
Source
Tennessee Purchasing Group

ConstructChat

Ask ConstructChat about Fence - Gate Installation - Crossville TN

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Tender Information FAQ

Tender Information

3 Q
The tender “Fence - Gate Installation - Crossville TN” is a tender record in Taiyo, linked to the Rail sector. It is issued for works, goods, or services related to Tennessee, United States of America.

Participants

Not available for this record.

Status

Original status

closed

Taiyo status

Closed

Taiyo last update

2026-11-03

Contact

Not available for this record.

Description

Description

Security Fence Approved Model – Ameristar Impasse II – Gauntlet Style or written approved equal , must provide spec sheets at time of bid if another manufacturer is used . - Install approximately 445 LF of 7 ’ tall security fence - Three - rail design - 2 . 75 ” wide Pales - 11 ga rails - 12 ga I beam posts , - Line post to be on 8 ’ centers , all posts set in concrete , minimum embed 36 ” - Black “ Perma - Coat ” finish with 15 - year warranty . - All posts set in concrete . Security Gates – total 2 : 1 Black Security and 1 Chain Link Approved Model – Ameristar Passport IS – Gauntlet Style or approved equal , must provide spec sheet at time of bid if another manufacturer is used . - Install ( 1 ) 24 LF 7 ’ tall security gate with steel V - Track roll gate design , 4 ” gate posts - Gate to have ( 2 ) 6 . 625 ” schedule 40 weight bollard posts with yellow bollard sleeve covers for protection , a total of 4 bollard posts . - Three - rail design - Black “ Perma - Coat ” finish with 15 - year warranty - All posts set in concrete . Chain link Gate – Rear Entrance to the Facility - ( 1 ) Auto slide gate ( 24 ’) wide cantilever 7 ’ tall . - Gate to match Chain link fencing . Chain Link Fence - Install approximately 600 LF of 6 ’ tall with galvanized chain link fence - with ( 3 ) strands of barbed wire , 12 . 5 - gauge , 4 - point barbs , max 5 ” o . c . - 9 - gauge fabric with 2 ” chain link mesh - 3 " WT / LG40 corner , end and pull posts . - 2 " WT / LG40 weight line posts , - 1 - 5 / 8 " diameter , 40 - weight , top rail - 7 - gauge bottom tension wire . - Line post to be on 10 ’ centers , all posts set in concrete - Tie in new fencing to existing chain link fence post using all new mechanical ties and new barbed wire as needed . - Selvages : Top and Bottom selvage twisted . Access Controls - Shall be compatible with existing AIPHONE system and tie in . - ( 2 ) dual height gooseneck - stand with two access control pads with AI - IX - DV cameras - Minimum 18 ” diameter concrete pad , embedded 24 ” in the ground , for gooseneck stand - install a ( 120v or 240v ) single phase circuit , from the nearest service panel in the facility to the gate operator with 1 ” fiberglass / HDPE or PVC conduit with pull string - install 1 ” fiberglass / HDPE or PVC conduit for data communication from existing AIPHONE master station IX - MV system to the access control pad / camera and operator with pull string - fully integrate the existing system with new components ; test & verify proper operation of controls - ( 2 ) protective 6 ” steel pipe bollards ( at each dual height gooseneck ), concrete filled , painted safety yellow , embedded 3 ’ in the ground in minimum 12 ’ diameter hole with concrete . Shall extend 48 ” above grade and be plumb in all directions . - In the event maximum distance exceeds 300 ’ and a repeater is necessary , this must be included in the bid . An as - built drawing with the repeater location noted must be provided to the State of TN . - Conduits shall be bored under any concrete or asphalt surfaces .

Location

Country

United States of America (USA)

State

Tennessee

Source

Source

Tennessee Purchasing Group

URL

More Details

Record type

Tender

Sector

Rail, Steel, Commercial, Cement, Residential, Road

Article published date

2026-05-05

More on this tender

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this tender
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this tender