FHWA Equipment Rental Offset Drill w / operator D12

2026-11-03

Line CL Description Quantity UOM Unit Cost Line Total or Contract Amnt 1 FHWA - Offset Drill w / Op Vendor Provides Railroad Steel . 33000 . 00000 LNFT Extended Description Furnish ( 2 ) modified rotary drill ( s ), truck or track mounted with operator ( s ) to drill 7 " TO 10 " diameter holes in soil and rock to install and place railroad rails up to 39 feet in length and weighing up to 140 lbs per linear yard . Rotary drill must have capability of drilling holes that are offset a minimum of five ( 5 ) feet from the edge of the truck tire or track ( if track mounted ) to the center of the hole . Drill rig must be capable of handling railroad rail up to 39 feet in length . Drill rig should be powered by motor of 130 horsepower or greater with at least 16 , 000 lbs . pulldown pressure and a 300 CFM or greater air compressor . Drill rig must be capable of drilling from either side or back of carrier . Drill must have capability of drilling a maximum of forty ( 40 ) foot holes from road elevation . Vendor must be able to drill and install 800 feet of railroad steel per 8 - hour workday per drill . Leeway will be given for weather and unforeseen circumstances at the Department ' s discretion . Vendor to furnish used railroad rails . Vendor shall submit a certification stating that all manufacturing processes involved with the production of steel or iron materials occurred in the United States . The attached recycle content form must be submitted with the bid . Use recycled ( used ) railroad rails classified with a nominal weight of 130 lb / yd ( pounds per yard ) size or greater . Line CL Description Quantity UOM Unit Cost Line Total or Contract Amnt 2 FHWA - Offset Drill w / Op Department Furnishes Railroad Steel 2000 . 00000 LNFT Extended Description Furnish ( 2 ) modified rotary drill ( s ), truck or track mounted with operator ( s ) to drill 7 " TO 10 " diameter holes in soil and rock to install and place steel railroad rails up to 39 feet in length and weighing up to 140 lbs per linear yard . Rotary Drill must have capability of drilling holes that are offset a minimum of five ( 5 ) feet from the edge of the truck tire or track ( if track mounted ) to the center of the hole . Drill rig must be capable of handling railroad rail up to 39 feet in length . Drill rig should be powered by motor of 130 horsepower or greater with at least 16 , 000 lbs . pulldown pressure and a 300 CFM or greater air compressor . Drill rig must be capable of drilling from either side or back of carrier . Drill must have capability of drilling a maximum of forty ( 40 ) foot holes from road elevation .

Kentucky

2026-05-08