Fire Alarm Control Panel Upgrades in Alameda County

2026-11-03

Scope of Work 1 . Contractor agrees to provide to the California Department of Transportation ( Caltrans ) Fire Alarm Control Panel Upgrades as described herein . Contractor shall provide all labor , tools , equipment , material , parts , supplies , permits , travel and incidentals necessary to upgrade existing Fire Alarm Control Panel ( FACP ) digital alarm communication system from Plain Old Telephone Service ( POTS ) copper landlines to Cellular by installing a Cellular Alarm Communicator for the San Francisco Oakland Bay Bridge Maintenance Complex Fire Life Safety ( FLS ) system . 2 . Subcontracting is not permitted under this Agreement . All references to subcontracting or Subcontractors as found herein are not applicable to this Agreement . 3 . The services shall be performed at 200 Burma Road , Oakland , CA 94607 in Alameda County . 4 . Any reference to Caltrans Contract Manager shall also include his / her designee . Detailed Description of Work : A . Contractor shall upgrade existing FACP digital alarm communication system from POTS copper landlines to cellular communicator system . Contractor shall install a new Cellular Alarm Communicator and program to existing FLS system that utilizes Siemens software and equipment . The digital alarm communicator system must meet the minimum specifications and guidelines listed on Caltrans IT Hardware & Software Standards . B . The service provider shall be an authorized programmer on the Desigo systems , and the technician assigned shall be certified to work on Siemens Desigo systems . C . Contractor shall field and verify signal cellular dialer signal strength via NAPCO testing tool . D . Contractor shall provide all labor , tools , equipment , material , parts , and supplies to install the following : 1 ) One ( 1 ) NAPCO StarLink Cellular unit . 2 ) One ( 1 ) dual input module to FACP for supervision of status of NAPCO unit . E . Contractor shall test initiating device ( one of each type ) to ensure proper reporting once NAPCO device has been installed . F . Contractor shall spot test the FLS system for the purpose of proper reporting of alarm , trouble , and supervisory signals to Siemens Central Station . G . Contractor shall test a sample of the smoke detectors , pull stations , waterflow switches , and control valves with a tamper switch . H . Contractor shall provide engineered design submittal plans to Oakland Fire Department . I . Contractor shall submit the design package to City of Oakland for permit approval . J . Contractor shall be responsible for any permit fees , Authority Having Jurisdiction ( AHJ ) review , and final acceptance testing with AHJ K . Contractor shall program cellular communicator to the existing Siemens FLS system to communicate fire event signal . L . Contractor shall route necessary wire and install necessary junction boxes to facilitate the above scope of work ( for the cellular dialer only - no additional installation labor or materials will be required should there not be sufficient cellular reception in the current dialer room ).

California

2026-03-27