Fire Protection System Services

2026-11-03

The selected contractor shall provide full - service fire protection system ITM and repair for the following systems : 3 . 1 Wet Pipe Fire Sprinkler Systems Service shall include but not limited to : • Full NFPA 25 required inspections and testing • Main drain and inspector ’ s test valve testing • Control valve inspections and supervision verification • Gauge testing and replacement as needed • Alarm device testing • Backflow device coordination ( where applicable ) • Obstruction investigation when required • Repairs and replacement of system components • Emergency repair response 3 . 2 Dry Pipe Fire Sprinkler Systems Services shall include : • Full NFPA 25 required inspections and testing • Trip testing ( partial and full , per code cycle ) • Air pressure and quick - opening device testing • Low air alarm testing • Accelerator and air maintenance device service • Dry valve internal inspections • Compressor inspection and maintenance • Freeze protection assessments • Corrosion monitoring and reporting 3 . 3 NFPA Inspection , Testing & Maintenance ( ITM ) Compliance Contractor shall perform services in accordance with the most current adopted editions of : • NFPA 25 – Inspection , Testing , and Maintenance of Water - Based Fire Protection Systems • NFPA 13 – Installation of Sprinkler Systems ( as applicable to modification ) • NFPA 72 – Fire Alarm and Signaling Systems ( interface testing as needed ) • NFPA 14 – Standpipe Systems ( if present ) • NFPA 20 - Fire Pumps ( if applicable in any facility ) Contractor shall : • Provide a compliance schedule for each facility • Maintain digital and hard - copy records • Tag all systems per NFPA requirements • Immediately report deficiencies and impairments • Provide impairment procedures consistent with NFPA and AHJ requirements • Coordinate with municipal staff for fire watches when necessary 3 . 4 Deficiency Repairs • Provide written deficiency reports with code references • Provide cost proposals for corrective work within 5 business days • Perform repairs only upon written instruction • Use UL / FM approved components • Provide as - built documentation for system modifications 3 . 5 Emergency Services • 24 / 7 emergency response capability • Maximum 4 - hour on - site response time • Temporary and permanent repair services

Tennessee

2026-05-15