Flooring

2026-11-03

The Contractor shall furnish all labor , materials , tools , equipment , supervision , transportation , and incidentals necessary to complete the entire Scope of Work that follows : 1 . Prospective contractor shall perform the removal of existing floor covering ; carpet tile , any glue and quarter - round along baseboards . 2 . Prospective contractor shall complete the removal of all debris from project to dispose offsite . 3 . Prospective contractor shall remove and reinstall existing door units and all trim to a height that allows the doors to clear the new flooring installed if applicable . 4 . Prospective contractor Shall Construct all construction safety barriers on the outside if saws are set up to keep bystanders out of work areas and at a safe distance for the duration of the project . 5 . Prospective contractor shall furnish all tools , materials , equipment , and labor necessary to install ( Approx . 247 sq . yd .) of new commercial grade , low knap , level loop carpet tile . 6 . Prospective contractor shall be responsible for grinding , scraping off all glue , and tack strips , if applicable , to allow for a smooth transition between rooms . 7 . Modular tile carpeting for use in facilities shall be a high - performance , branded 100 % Type 6 or 6 , 6 nylon . Mill extruded nylons will not be accepted . Carpet shall be tufted and have a manufacturer ’ s PVC - free cushion backing system which provides a nonpermanent installation application , using a nonreactive or high moisture , releasable adhesive , meeting or exceeding requirements for certification according to the CRI Green Label Plus IAQ Test Program 8 . The flooring shall have a 20 - year Commercial warranty and Lifetime residential warranty equivalent . 9 . Prospective contractor shall work with Superintendent and Regional Supervisor to determine product suitable for this project PRIOR to ordering . Product must be approved by Regional Supervisor . 10 . Prospective contractor shall order 10 % over material required to complete project for park to keep on - hand for future use . 11 . Prospective contractor shall replace any bad base board and add any that might be necessary and caulk , fill nail holes and paint all base board to best match existing with two coats of BEHR Marquee or equivalent . 12 . When old flooring is removed a base shoe , quarter round painted to match base . Or to match flooring will be installed throughout the room to fill gap so that the base doesn ’ t have to be removed . 13 . The floor color shall be chosen by Park from operations set standards or equivalent . 14 . Prospective contractor shall be responsible for moving any furniture necessary to install flooring . 15 . All Work to be done with in ( 60 days ) from time of bid being awarded . 16 . Prospective contractor shall take precautions to Prevent unnecessary damage to any part of bldg . 17 . Prospective contractor shall be responsible for all post - project clean - up and the remove all debris ( including nails and metals , all disposable materials offsite ) at the end of each workday . 18 . Prospective contractor shall work during normal business hours . 19 . All work shall be scheduled with park officials . 20 . Must provide one ( 1 ) year warranty that applies to all work performed . 21 . Prospective contractor to furnish Workmen ’ s Comp ., General Liability Insurances . 22 . Prospective contractor shall be responsible for all materials deliveries and protection of during construction . 23 . Prospective contractor shall work with Park for best time for work to be completed .

Arkansas

2026-03-27