Fountain Repair

2026-11-03

Fountain Lighting System ● Provide power for the new lighting system from an existing outlet located adjacent to the fountain basin . ● Run new electrical wiring under the brick surface , enclosed in conduit for protection , from the outlet to a new outlet installed next to the fountain basin . ● Core drill through the fountain basin wall to allow wiring to pass through to the interior of the basin . ● Install five ( 5 ) new underwater LED lights positioned beneath each fountain nozzle . ● Connect all new lighting to a transformer located beside the new outlet , programmed to control operating times for the lights . Fountain Basin Sealing ● Pump out and remove all water from the fountain basin . ● Protect surrounding surfaces by taping off tiles , fountain nozzles , and other areas that do not require sealant application . ● Sand the entire basin surface to ensure proper adhesion of the new sealer . ● Apply three ( 3 ) coats of professional - grade sealer , allowing 24 hours of curing time per coat . ● Seal all visible cracks in the tile with waterproof silicone to prevent water intrusion . ● Clean and repaint the exterior of the fountain basin . Auto Fill Install ● Remove and dispose of the existing non - functional autofill unit located in the fountain basin . ● Supply and install a new Pentair IntelliLevel 523265 electronic autofill system ( or equivalent ) in the fountain basin . ● Install the new control box in the pump room and integrate it with the existing solenoid to provide automated water level control . ● Provide warranty information for all workmanship and installed components .

Maryland

2026-05-02