Fuel Tank Replacements ( Rebid )

2026-11-03

The selected vendor shall provide all labor , materials , and equipment required for a turn - key solution involving the decommissioning of existing equipment . The following demolition and removal tasks are required :  Tank Removal : Complete removal and off - site disposal of two ( 2 ) existing tanks , including all residual fuel , sludge , and contaminated rinsing fluids .  Containment Area : Complete removal and off - site disposal of existing liquid , including all residual fuel , sludge , and fluids .  Containment Wall Removal : Remove the 34 ’ x 5 ’ 2 ” concrete wall of the containment area facing the pumps .  Concrete Pad Removal ( Pump Area ): Remove the 18 ’ x 30 ’ ( 540 SF ) concrete pad surrounding the pumps .  Concrete Pad Removal ( Intermediate ): Remove the 34 ’ x 8 ’ ( 272 SF ) concrete pad located between the pump pad and the containment wall .  Island Removal : Remove the existing 12 ’ x 4 ’ ( 48 SF ) concrete island pad . II . Tank Installation and Specifications The project requires the furnishing and installation of one ( 1 ) 6 , 000 - gallon and one ( 1 ) 10 , 000 - gallon cylindrical aboveground horizontal tank designed for gasoline and diesel fuel . All options must fit within the existing containment areas of 11 . 5 ’ x 22 ’ and 21 . 5 ’ x 22 ’. Option # 1 : UL 2085 Fireguard  Tank Standard : Furnish and install Fireguard horizontal tanks or approved equal .  Interior Finish : Each tank interior will be painted with an epoxy liner .  Exterior Finish : Each exterior will be painted with an epoxy primer and white urethane .  Warranty : The tanks must come with a 30 - year warranty . Option # 2 : UL 142 Double Wall  Tank Standard : Furnish and install UL 142 double - wall horizontal tanks .  Exterior Finish : Each tank exterior will be painted with an epoxy primer and white urethane .  Warranty : Provide a standard tank warranty . Required Components for All Tank Options The following components must be furnished and installed on each of the tanks specified above :  Venting : Primary and emergency vents .  Monitoring : Morrison Brothers ( or approved equal ) liquid level clock gauges .  Protection : Morrison Brothers ( or approved equal ) overfill protection valves .  Fill System : Grade - level fill piping complete with a 20 - gallon Spill Mate overspill container .  Hardware : 1 - way swing check valves , ball valves , male adapters , and dust caps .  Identification : Required product identification and warning decals . III . Electrical , Piping , and Site Improvements The vendor must provide pricing for each of the following infrastructure configurations as directed . Option # 1 : Underground Infrastructure  Electrical Replacement : Replace all electrical wiring , conduit , switches , and the breaker panel associated with the tank installation and routed to the fuel pump and card reader location .  Emergency Power : Includes a manual transfer switch and portable generator tap box .  Piping Replacement : Replace all piping , fittings , and valves associated with the tank installation and routed to the fuel pump and card reader location . Option # 2 : Selective Replacement  Electrical Installation : Install only needed electrical wiring , conduit , and switches associated with the tank installation and pump / card reader location .  System Testing : Test and replace only failing existing electrical components and piping / valves .  Emergency Power : Includes a manual transfer switch and portable generator tap box . Option # 3 : Above Ground Infrastructure  Structural Support : Install a structural support system from the AST area to the fuel island that fits under the existing canopy .  Compliance : The structure must meet all codes for load , seismic , and wind ratings .

Tennessee

2026-05-05