Furnish and Deliver Station Wear

2026-11-03

1 . All items provided shall be new , and unused , of good quality , neatly and professionally sewn and produced . No display , demonstration , refurbished , previously laundered , or sample models will be acceptable . 2 . All work must be of the highest professional quality and produced in accordance with the best industry practices , free from defects , with clean , even stitching and no loose threads causing seam failure , or tight threads causing bunching . 3 . All garment parts must be properly cut to avoid puckering after laundering . 4 . All hems shall be blocked at the front opening , turned and single - needle stitched . The garment shall not have incomplete sewn hems or loose threads . 5 . Any metal fasteners must not come into direct contact with the wearer ' s skin . 6 . All items must meet or exceed the most current version of applicable National Fire Protection Agency ( NFPA ), American Society for Testing and Materials ( ATSM ), International Organization of Standardization ( ISO ), US Government Commercial Item Description ( CID ) standards , Occupational Safety and Health Administration ( OSHA ) and Hawaii Administrative Rules ( HAR ) regulations to include but not limited to : a . NFPA 1970 - Standard on Emergency Services Work Clothing Elements b . NFPA 2112 - Standard on Flame - Resistant Clothing for Industrial Personnel Against Short - Duration Thermal Exposures c . ASTM F1506 - Standard Performance Specification for Flame Resistant and Arc Rated Protective Clothing d . ATSM 6139 - 16 ( 2020 ) - Standard Practice for Stitches and Seams e . ASTM D - 6413 - Standard Test Method for Flame Resistance of Textiles ( Vertical Test ) f . OSHA 1910 . 269 - Standard for Electric Power Generation , Transmission , and Distribution g . HAR Title 12 , Subtitle 8 , Part 2 - General Industry Standards h . ISO 9001 - Quality Management Systems i . Federal Trade Commission ( FTC ) Labeling Rules - Federal Trade Commission requirements for garment labeling j . ASTM D - 6193 - Federal / National standards for stitches , seams , and stitching . k . A - A - 50195 - Military / Federal specification for thread quality and performance . 7 . Upon the City ' s request , proof of compliance may be required within 14 calendar days . 8 . Finished uniforms must be inspected by the Contractor and deemed to meet requirements for professional , neatly sewn products before pickup and acceptance by the ordering City personnel .

Hawaii

2026-04-08