General Building Repairs in Yolo County

2026-11-03

will be working at or near the job site . Contractor shall coordinate activities with Caltrans Contract Manager prior to the start of work to avoid delays . 9 . Existing Facilities A . Preparation . 1 ) The limits of removal must be located and identified . by contractor prior to the start of any work 2 ) Items to be removed and the interface of items to be removed and items to remain intact must be identified and marked . 3 ) Prior to removing concrete or masonry , a saw cut approximately one inch ( 1 ″) deep must be made along the limits of removal on all faces that will be visible in the completed work . 4 ) At new door opening in concrete or masonry , full depth saw cuts must be made from both faces . Overcuts must not be made at corners . Remaining material at corners must be chipped out and the surfaces ground smooth . B . Removal 1 ) Removal must be to the limits shown through this Exhibit A . Removal must be done carefully to minimize damage to the portions to remain . Remaining portions that are damaged by Contractor ’ s operation must be restored to original or improved condition at contractor ’ s expenses . 2 ) Existing apparatuses , devices , or accessories which would be functionally impaired by new construction or remodeling must be moved , brought out to new surfaces , or provided with new access covers , as necessary to restore apparatuses , devices , or accessories to their original usefulness .

California

2026-05-10