Generator Project - Happy Camp

2026-11-03

Task One – Trenching / Concrete There will be approximately 100 feet of trenching , and a cultural monitor on site at all times of soil disturbance . Must install a 15 ’ X25 ’ X4 ” concrete slab , with # 5 rebar at 18 ” on center . Concrete must meet 3500 PSI compression strength , and must take three cylinders for testing . Task Two – Installation All wiring , conduits , automatic switch gear , and other electrical equipment will be properly sized and installed in accordance with Federal , State , and Local codes . All wiring , conduits , and other electrical equipment will be installed in a neat and organized fashion . Unsatisfactory work will not be accepted by the owner until rectified by the Contractor at their sole expense . All wiring and equipment will be clearly and properly marked to know their purpose . Contractor must supply and install appropriately sized propane fuel tank / tanks and all necessary plumbing . Task Three – Clean up All manuals and information on the unit will be submitted to the owner at the completion of the project . A general walk - through of the operation will be done with Tribal employees . All equipment will be inspected by an Owner representative throughout the project , and testing will be completed before the project is considered satisfactory . The contractor will be responsible for the initial start - up of the generator . Any damage to the facility and / or equipment as a direct result of the project will be repaired by the Contractor . All remaining project debris and materials will be properly disposed of by the Contractor at this time , and the area will be left in a condition equal to or better than found .

California

2026-03-27