Generator Project

2026-11-03

Lowndes County , on behalf of PruittHealth Corporation , is requesting sealed bids from qualified electrical contractors to furnish and install emergency standby generators at five ( 5 ) nursing home facilities located throughout Lowndes County , Georgia . The complete scope and technical requirements are defined in the attached Electrical Engineer ’ s Drawings and Specifications prepared by CBHF Engineers , PLLC ( Project No . 25103 , “ Engine - Generator Additions ,” dated 12 / 05 / 25 ). Contractors may submit multiple bid options , such as varying generator manufacturers or delivery timelines , provided all options fully meet the minimum requirements of these specifications and the attached construction drawings . SECTION 2 – FACILITIES INCLUDED Emergency standby generators shall be furnished and installed at : 1 . PruittHealth – Crestwood 2 . PruittHealth – Holly Hill 3 . PruittHealth – Lakehaven 4 . PruittHealth – Parkwood 5 . PruittHealth – Valdosta SECTION 3 – MINIMUM GENERATOR CAPACITY REQUIREMENTS Based on engineering specifications and facility load analysis :  Crestwood – Minimum 230 kW  Holly Hill – Minimum 230 kW  Lakehaven – Minimum 230 kW  Valdosta – Minimum 200 kW  Parkwood – Minimum 350 kW All generatorsshall be diesel - fueled , equipped with integral belly tanks , and meet all performance , design , testing , and installation requirements contained in the engineering drawings and specifications . SECTION 4 – SCOPE OF WORK The contractor shall provide all labor , equipment , materials , tools , transportation , permits , and supervision required forthe complete , functional , and code - compliant installation of an emergency power system at each facility . The scope includes , but is not limited to : 1 . Furnishing and installing diesel - powered standby generators meeting the minimum facility ratings listed above . 2 . Providing concrete housekeeping pads where required . 3 . Furnishing and installing automatic transfer switches , feeders , conduits , grounding systems , and associated electrical infrastructure as shown in the engineer ’ s drawings . 4 . Reconfiguring existing electrical service to integrate the generator and ATS system . 5 . Providing all trenching , backfill , compaction , penetrations , sealing , and surface repairs necessary for a complete installation 6 . Coordinating required outages , ensuring continuity of critical circuits unless otherwise approved by the Owner . 7 . Preparing a Temporary Power Plan for any required service interruptions . 8 . Performing load - bank testing in accordance with the drawings and manufacturer requirements . 9 . Providing training , as required ( see Section 8 ). 10 . Providing O & M Manuals , as required ( see Section 8 ). 11 . Compliance with all specifications noted on E - 1 through E - 15 , including :  General Notes  Electrical Specifications  Wiring methods  Grounding requirements  Nameplate and identification requirements  Testing requirements  Raceway and conductor requirements ( Refer to drawings E - 1 to E - 15 )

Georgia

2026-04-29