Graco Grindlazer HP 10 " Scarifying system and Graco Line Driver HD Self - Propel System

2026-11-03

FRAME 2 . 1 The frame shall be 2 - component , polyurethane enamel coating . Anodized   frames are not acceptable . 2 . 2 The frame shall have a minimum of 4 lift rings . No exceptions allowed .   2 . 3 The frame shall allow for the installation of a hitch kit . No exceptions allowed .   3 . ENGINE 3 . 1 The engine shall be a Honda GX 390cc / 13 . 0 HP , featuring an oilalert system ,   Cyclone air filter system , and electric start . 4 . OPERATOR CONTROLS 4 . 1 The unit shall have a variable digital depth control system allowing cut depth   adjustments in 0 . 010 in .( 10 mil .) increments . No exceptions allowed . 4 . 2 The unit shall have ability to digitally set and store position where drum meets the   surface for achieving consistent and accurate cut depth control . 4 . 3 The unit shall have a minimum of two safety shutoff switches within reach of the   operator . One shall be directly connected to the operator . No exceptions allowed .

Maine

2026-05-01