Gymnastic Equipment PM & Repair

2026-11-03

Uneven Bars  Check if the stainless steel rail holders are provided with a nylon disc .  Grease the rail holders ( by using Vaseline ).  It is absolutely forbidden to use sandpaper when cleaning the rails . Remove magnesia only when the rails are dry , to prevent that the soft parts of the veneer will be removed as well . Only use scouring pads . Velcro ( hook ) is a good alternative .  Check if width adjusters work well .  Check if the bolts that link the width adjusters to the uprights are well - tightened .  Check if the bolts of the inner tubes are well - tightened .  Inspect the tension cables , chains and D -( chain ) shackles for damages and remove the magnesia .  Check if the slide locks and the pulleys are functioning well and if necessary lubricate them with Teflon spray . With the slide locks , the tension on the apparatus can be changed .  Clean metal parts of the frame with a non - corrosive cleaning product . Balance Beam  Check if the beam is well - fixed to the legs .  Inspect the cover of the beam for damages .  Check if the end caps are well - fastened .  Provide the beam with a protection cover before transportation .  Clean metal parts of the apparatus with a non - corrosive cleaning product .  Only clean the cover with a dry cloth or a soft brush . Do not use any liquid . Vaulting Runway  Check the vaulting runway for damages  Check if the Velcro strap still sticks well onto the wooden board .  If stored : o Roll up the runway with the felt carpet on the outside and cover . o Do not put the runway against parts that stick out in order to avoid dents ...

Ohio

2026-04-29