Halsey Hall Generator Replacement - KSH

2026-11-03

A . This Section includes packaged engine - generator sets suitable for use in emergency standby applications with the features as specified and indicated . Engine generators will be used as the standby power source for the system , and shall be capable of providing reliable power with no runtime limitations while the primary source of power is unavailable . B . Provide a new diesel engine - driven standby generator system to supply the standby power to the building electrical system as indicated on the Drawings and schedules . This system shall be a NFPA 110 EPSS , Class 24 , Type 60 , Level 2 system . C . Provide unit mounted in an all - weather sound enclosure with a unit mounted exhaust systems with a critical muffler . Provide manufacturer recommended vibration isolation for engine - generators including pads , springs , rails , bases , hangers , and connectors . D . Provide generator engine fuel tank integral with the skid base and having capacity to fuel engine for minimum 24 hours at 100 % rated output , or 500 gallons minimum , whichever is greater . E . Provide a unit mounted main circuit breaker to prevent overloading of the generator and power supply conductors . F . Provide a complete and fully operational standby power generation system including all engine fueling , heat rejection , starting and operation controls and safeties , voltage regulation , output breaker , etc . 1 . 2 QUALITY ASSURANCE A . Manufacturers : Firms regularly engaged in the manufacture of engine - driven standby generator systems , of types , ratings and characteristics required , whose products have been in satisfactory use in similar service for not less than 10 years . B . Source Limitations : Obtain packaged generator sets and auxiliary components through one source from a single manufacturer . C . NEC Compliance : Comply with applicable standby generator requirements of NEC including , but not limited to , emergency and standby power generating systems . D . NFPA Compliance : Comply with applicable requirements of NFPA 37 , " Installation and Use of Stationary Combustion Engines and Gas Turbines ", and NFPA 110 requirements for standby power supply system . E . ANSI / NEMA Compliance : Comply with applicable requirements of ANSI / NEMA MG 1 , " Motors and Generators ", and MG 2 , " Safety Standard for Construction and Guide for Selection , Installation and Use of Electric Motors and Generators ". F . IEEE Compliance : Comply with applicable potions of IEEE Std . 241 , " IEEE Recommended Practice for Electric Power Systems in Commercial Buildings " pertaining to standby power .

Kansas

2026-04-08