HANSEN PHASE IV BASIN PAINTING

2026-11-03

Hansen Phase IV Basin Painting : Sandblasting , cleaning , and coating of the existing below the water line basin equipment in two individual treatment basins . The basins will be referred to as Phase IV Primary basin No . 8 and Phase IV Final Basin No . 5 . The existing stainless - steel squeegees as installed on the rake arm sweeps in Primary basin No . 8 and Final basin No . 5 are to be removed prior to sandblasting and painting . New stainless - steel squeegees , with new stainless - steel hardware are to be installed in Primary basin No . 8 and Final basin No . 5 following completion of painting . The existing weir plates in Phase IV Primary Basin No . 8 are to be removed prior to sandblasting and painting of the basin . New fiberglass weir plates are to be fabricated and installed on Primary Basin No . 8 following coating completion . The launder trough adjuster bolts on both the Phase IV Primary Basin No . 8 and Final Basin No . 5 are to be replaced with stainless steel hardware . The Contractor will be responsible for keeping all dust , debris , blast media , and airborne coatings within the designated work area , minimizing overspray and protecting surrounding equipment and buildings . Any overspray on buildings , Company and Personnel vehicles will be the Contractors responsibility to remediate

Kansas

2026-04-08