Hawaii Disability Parking Decals

2026-11-03

Material Requirements . 1 . Parking Permit Expiration Decals . The material for the parking permit expiration decal shall be resistant to cracking , peeling , blistering or temperature change when applied to a parking placard of not less than sixty ( 60 ) months under normal conditions of use . Decals shall be flexible and of such composition that once applied , it cannot be removed intact . Decal material shall be reflective and white 3M Scotchlite Validation Security Sheeting # 5470ER . 1 . 3 Fabrication Requirements . 1 . Parking Permit Expiration Decals . A . Adhesive and Protective Liner 1 . The pre - coated pressure sensitive adhesive shall form a durable bond to clean , dry surfaces for the life of the decal . 2 . The adhesive shall not exude from edges of the finished decal so as to cause stacked pieces to stick together while packaged in shipment and distribution . 3 . The protective liner attached to the adhesive shall be removed by peeling without soaking in water or other solvents and shall be easily removed by a scallop score backside to bend and peel the decal after accelerated storage for four hours at 150 degrees F ( 66 degrees C ) under weight of 2 . 5 pounds per square inch ( 0 . 17 kg / cm squared ). 4 . The protective liner shall be of eighty ( 80 ) pound basis weight paper and total thickness of decal , adhesive and liner shall not exceed 0 . 012 inch ( 0 . 305 mm )

Hawaii

2026-04-08