Hillsdale High School Asbestos Removal Bids

2026-11-03

SCOPE OF WORK Hillsdale High School Containment Area 1 – Cafeteria , Stage , and Hallway Area ASBESTOS MATERIAL BUILDING LOCATIONS QUANTITY OF ACM Acoustical ceiling plaster system ( finish coat , scratch coat , and wire mesh ) Cafeteria , stage , and hallway east of cafeteria 6 , 534 sf Pipe insulation above acoustical plaster All areas of ceiling removal Unknown quantity , remove all TSI above ceilings in bid Containment Area 2 – Library Area ASBESTOS MATERIAL BUILDING LOCATIONS QUANTITY OF ACM Acoustical ceiling plaster system ( finish coat , scratch coat , and wire mesh ) Faculty dining , small kitchen , hallway , storage room , library , hallway east of library , and library storage 6 , 420 sf Pipe insulation above acoustical plaster All areas of ceiling removal Unknown quantity , remove all TSI above ceilings in bid 9 ” vinyl floor tile and mastic Hallway by library , storage room , small kitchen , faculty dining , and S . library storage 1 , 528 sf Containment Area 3 – Ceiling around columns outside Gymnasium ASBESTOS MATERIAL BUILDING LOCATIONS QUANTITY OF ACM Acoustical ceiling plaster system ( finish coat , scratch coat , and wire mesh ) Cutting around columns at trophy case in Gym lobby to facilitate removal of columns . Encapsulate edges of ceiling PROJECT NOTES : • All asbestos removal is to be completed in accordance with the applicable OSHA work practices . • Both phases will require TEM clearance , which will be conducted by BHI in accordance with AHERA / Michigan regulations and analyzed within 24 - hours of collection of the samples . • All lighting fixtures are to be removed , cleaned , and disposed of by the Abatement Contractor . The fluorescent tubes are to be removed and recycled . • The Abatement Contractor is to field check all ballasts located inside of the fluorescent light fixtures in the building to determine the presence of PCB ’ s by the label identification . All ballasts without labels clearly stating “ No PCB ’ s ” are to be packaged , transported , and disposed or recycled as PCB containing material by the Environmental Contractor in accordance with EPA regulations in 40 CFR 761 . • The floor tile mastic is to be removed by chemical or wet grinding . • All furniture and loose items will be removed from the work areas . The GC will remove shelving and cabinets from the areas of flooring removal . • The glass divider windows in the library can be left in - place or removed by the abatement contractor at their discretion . If the glass does not remain stable when the ceiling is cut down , then it must be removed and stacked outside the containment for disposal by the GC .

MITN

2026-04-29