INDEFINITE QUANTITY GENERAL CONTRACTING SERVICES FOR VACANT UNIT RECONDITIONING THA WIDE

2026-11-03

Thoroughly clean apartment / replace bulbs as described below . This operation shall take place after all other work is completed . The following cleaning process will be followed precisely throughout the units . The final product will be thoroughly inspected and rejected if done improperly or incompletely . Punch list inspection will be terminated if found that this work has not been executed properly . This termination may result in delayed payment or charges for aborted inspections . All cleaning shall be done incorporating a disinfecting agent compatible with the materials being cleaned and having documented anti - bacterial and anti - viral properties . This is particularly applicable in the kitchen and bathroom areas of the apartments . All workmen shall be capable of reading , be given a copy of these specifications for thorough review , be properly instructed in the use of all materials , and shall wear the proper protective gear . Cleaning materials shall not be stored on the premises , and all equipment and materials will be removed from the site daily and at the end of the work . The following work shall be performed : 1 . Windows : Wash windows inside and out including glazing , sashes , frames and sills . Remove decals and adhesive residue . 2 . VCT : General : Apply liquid floor laser Stripper to all VCT flooring in living room , kitchen , bedrooms and hallways . Use rotating stripping machine to remove all old wax , then mop floors thoroughly with clear water to remove all residue , then apply new wax to floors using 20 ” blue stripe mop head , so not to leave string residue on floors . Note : be sure to clean all cove base of stripper and Wax residue , if possible , remove cove base and replace with new . Either protect baseboards prior to work commencement or remove all cleaner splatter from the baseboards and walls after this work is completed . Under Range : Turn off range gas valve , disconnect gas piping , disconnect anti - tipping device if present , remove range from opening , clean floor under range , reconnect range to gas , install anti - tipping device if missing or reinstall anti - tipping device if present , turn on gas valve , check for leaks with leak detector and correct leak if found . Under Refrigerator : Unplug refrigerator , remove from opening , clean floor in refrigerator recess , replace refrigerator , replace plug , and check for proper operation . 3 . Replace VCT with LVT flooring , trimmed out with ¾ ” round molding - where needed . 4 . Vinyl Cove Base : Where present , scrub , clean , rinse , and dry all vinyl cove bases . Apply one coat of Butcher ’ s wax and buff . 5 . Ceramic Tile / Fiberglass Tub Surrounds : Thoroughly scrub with non - abrasive cleanser and wash surfaces of ceramic wall and floor tile and grout joints and rinse thoroughly . Treat and brush residual haze and thoroughly rinse and dry all surfaces to a high luster . Perform same operation on fiberglass tub surrounds using products compatible with this surface . 6 . Kitchen Cabinets : Thoroughly scrub and clean all existing wall and base kitchen cabinets . Thoroughly remove all grease from all surfaces , including , but not limited to , door faces , edges and hinges , stiles and undersides of all wall cabinets and ends of base cabinets ; then apply Minwax stain / sealer to all cabinet doors and facings , let dry then wipe down with tack cloth , to remove all Residue , from cabinets . After wiping cabinets with tack cloth apply Minwax polyurethane to cabinets and facings with fine bristle 2 ½ ’ sash brush . Work may require removing and rehanging doors to thoroughly clean in and around hinge areas . Remove all shelf coverings and adhesive . Secure all loose cabinet doors and adjust drawer slides as required to permit proper operation .

New Jersey

2026-04-29