Janitorial Services - Emporia

2026-11-03

1 . Bidder shall seal coat rubber surfacing ( both PIP and Pebbleflex ) for Twenty one ( 21 ) park sites . 2 . Sealant shall be an aliphatic binder . Binder must consist of Dicyclohexylmethane - 4 , 4 ’- Diisocyanate , CAS # 5124 - 30 - 1 , or equivalent as approved by District . Bidder to provide Safety Data Sheets ( SDS ) with bid . 3 . Bidder shall provide 6 ’ temporary chain link fencing around each rubber surface to be sealed to ensure no encroachment onto surface during seal coat application and the complete drying process . Fencing cannot be place in the fall zone of any play equipment . Fencing is to be removed within 24 hours of approved completed work . 4 . Bidder shall remove any and all debris from surface prior to applying sealant to meet the manufacturer ’ s requirements for surface preparation . This would include blowing off entire area and possibly pressure washing dirty or mossy areas . If pressure washing is necessary , caution should be used as to not damage the surface . Bidder should also inspect all locations prior to work being done to determine which sites might need pressure washing so they have time to dry prior to sealer coat application . 5 . Sealant shall be applied using a roller process . 6 . Sealant shall not be applied on windy days to avoid debris from blowing on wet binder . 7 . Bidder shall notify Cosumnes Community Services District ( District ) Project Manager at completion of the seal coat application at each location and will remain on - site for up to 60 minutes , to allow District Project Manager to visually inspect and approve seal coat application to satisfaction of District . 8 . Note : Stephenson and Wright Parks are the playground surfaces only and not the waterplay aquaflex surfacing

Kansas

2026-04-08