JEFFERSON STREET MILLING , PAVING , SIDEWALKS , & CURBING ( AROUND THE NEW PARK AREA DOWNTOWN )

2026-11-03

1 . Concrete Curb and Gutter  Provide and install cast - in - place concrete curb and gutter constructed with 3 , 000 psi minimum compressive strength concrete .  Curbs and gutters shall be reinforced with steel rebar , sized and installed in accordance with the City ’ s Building Department or in compliance with the Public Works Department specifications .  Subgrade shall be properly excavated , graded , moisture conditioned , and compacted to Public Works requirements , prior to placement .  All forming , placement , finishing , curing and jointing shall comply with Public Works requirements and Building Department standards .  All work shall be subject to Public Works inspections and approval . 2 . Concrete Sidewalk  Provide and install cast - in - place concrete sidewalk with minimum thickness of 4 inches .  Sidewalks shall be 5 feet wide ( minimum ), to meet ADA accessibility requirements and include cross slope , running slope , and surface finish , where applicable .  Concrete shall be placed over a properly prepared and compacted base .  Control joints , expansion joints , finishing , curing , and surface tolerances shall meet local code and industry requirements 3 . Asphalt Paving  Provide and install asphalt paving using 12 . 5mm normal mix .  Asphalt surface course shall be installed at minimum compacted thickness of 2 . 5 inches .  Existing base shall be proof - rolled and approved by the Public Works Department prior to paving .  Asphalt shall be placed , compacted , and finished in accordance with applicable specifications and local and industry standards . 4 . General Requirements  All materials , labor , equipment , and incidentals necessary to complete the work are included .  Work shall comply with all applicable local state and county regulations .  Final grades , alignment , and workmanship shall meet approved plans and inspection requirements .

Georgia

2026-04-29