Luminaire Poles

2026-11-03

Install luminaires in accordance with Subsections 556 . 03 . 8 and 703 . 04 . 5 . Check luminaires on the ground to ensure they provide the specified ANSI / IES light distribution pattern before mounting . Adjust the luminaires at night , as directed , to provide the best roadway light distribution . Notify the Project Manager when the luminaire system is complete . The luminaires may be put into operation when necessary for public use as directed by the Project Manager . 617 . 03 . 9 Advanced Flashing Beacons Furnish mounting hardware to mount the traffic signal and sign as shown in the Detailed Drawings . Furnish a traffic signal as specified in Subsection 703 . 08 . Payment for the sign and its mounting is covered on the signing plans . 617 . 03 . 10 Conductors and Cable Install wiring in accordance with the NEC requirements . Neatly arrange and lace wiring in cabinets , junction boxes , and the like . Run conductors in conduit except inside poles . Remove all dirt and moisture from the conduit runs before pulling wiring . Use powdered soapstone , talc , or other approved lubricant when placing conductors in conduit . Run signal light conductors without splices from a terminal block located in the cabinet , compartment , or signal head to a similarly located terminal block . Splice conductors only where specified using approved watertight connectors . Locate connectors in pole bases to be easily accessible through the handhole . Furnish watertight connectors with midget ferrule type fuses .

Montana

2026-04-29