Mather Fueling System Repairs

2026-11-03

This project involves modifying a 12 , 000 - gallon jet fuel ( F - 24 ) horizontal aboveground storage tank and the surrounding fueling area . The tank work includes installing a sampling / gauging hatch on a tank manway , installing a clock type mechanical gauge on another manway , recoating the exterior of the tank , replacing collision barriers , adding a catwalk that extends the entirety of the tank , and replacing the audible and visual alarms . The remote containment basin drainage pipe shall be repaired and sloped positively to the drain inlet / manhole direction . The asphalt near the fueling facility shall be replaced to allow better storm water drainage . The refueler parking concrete shall also be replaced . The dispenser fuel monitor shall be replaced by a non - coalescing filter and a hand pumped water draw off system shall be installed as well . Near the truck offload area , some asphalt is getting replaced with concrete to prevent the degradation of the asphalt when fuel is spilled . The POL building is getting replaced in kind at the same location . The ATG system is getting upgraded from a Veeder Root TLS - 350 Plus to a Veeder Root TLS - 450 Plus . The generator located inside the compartmentalized unit is being moved outside .

Nebraska

2026-04-29