Metal commercial waste containers

2026-11-03

Rear Load Containers : • Containers shall have front panel sloped to allow for ease of dumping • 1 yard thru 8 yard all side panels / bottom must be 12 - gauge steel . ( No seams ). • All corners must have continuous welded seams for strength . • 12 - gauge formed top channel around container top . • 1 ” solid steel winch hook welded in the center on the outside of the top channel for dumping . • Trunnion Bar : o 1 , 2 yard container 1 3 / 8 ” solid steel bar with keepers welded on both ends . o 3 , 4 yard container 1 1 / 2 ” solid steel bar with keepers welded on both ends . o 6 , 8 yard container1 3 / 4 ” solid steel bar with keepers welded on both ends . • 11 / 2 ” Removable drain plug . • 10 - gauge full length bottom channel support . • 1 yard thru 8 yard containers must have ( 4 ) 7 gauge caster pads . • 2 , 3 , 4 yard containers must have ( 4 ) 6 ” X 2 ” swivel casters • 1 / 2 ” lid rod supported by 3 / 16 “ steel braces and brackets that are welded or bolted to the steel frame . • 1 ½ ” Removable drain plug . • Container must be primed inside and out . ( Safety Orange Paint Required ) • Lid design , plastic single wall , multiple ribs . • Include your brochure and container specifications for the above .

Kansas

2026-04-08