Mowing L - St . Louis County

2026-11-03

Where the limits of mowing and trimming have been previously established , or natural landscaping has been preserved , mowing shall conform to the established mowing contours unless otherwise excluded by the engineer . Mowed areas shall be uniform in appearance with no streaking or scalping . No strip of unmowed areas greater than 5 feet shall be left unmowed between two mowing areas . Mowed areas of different widths shall be connected to produce smooth flowing transitions . Clippings shall be evenly distributed over the mowed area . No large clumps of clippings shall remain after mowing . Mowing height shall be as designated in the project details . 4 . 2 One side of the roadway shall not be mowed to a length for which the adjacent roadside cannot be mowed the succeeding workday . At the conclusion of each working day , no more than a one ( 1 ) mile section shall be left partially mowed . 4 . 3 Mechanical trimming shall be performed around fixed objects within the mowed portions of the roadway right - of - way including but not limited to sign posts , delineator posts , drainage structures , grass ditches , rock ditches , guardrails , fences , bridge ends , curbs , trees , rock outcrops , landscaped areas , planting beds , soundwalls , etc ., as directed by the engineer . Trimming or otherwise cutting of all vegetation shall be done along rock blankets and next to sound walls so as to provide a uniform look with the adjacent mowed area . Trimming may be performed either concurrently with the mechanized mowing operations or following the completion of mowing ...

Missouri

2026-04-29