New Mechanic ' s Office - Wilton Fire Headquarters

2026-11-03

5 . Install 8 ” CMU . Align top of wall with existing CMU wall , approximately 8 ’- 11 ”. Top course to be 4 ” CMU x 4 ” wide . Bottom 2 ’ of CMU wall to be filled solid with grout . Use # 4 bar every 12 ” doweled into existing slab . Use Hilti HIT - Re 100epoxt anchor . All corners and ends to be filled solid with grout 2 ’ in each direction . Reinforce with # 4 bar every 6 ” on center full height of wall . All CMU openings to have steel lintels 6 . Remove existing metal fence , drywall , studs , plywood and sheathing . Cut all anchors flush with slab . 7 . Use 1 / 2 ” pre - molded filler between existing and new CMU . Connect CMU walls with H & B 345 - BT flexible tie every24 ” on center . Caulk joints on both sides . 8 . Use ½ ” pre - molded filler between new CMU and steel column with H & B 363 flexible slot every 24 ” on center . Caulk joints on both sides . 9 . Provide and install 36 ” X 6 ’- 8 ” X 1 - 3 / 4 ” hollow metal door . Grout door frame solid with grout . Door to have 24 ” x24 ” vision panel with ¼ ” tempered glass . Provide steel louver 2 ’ x2 ’ to allow 50 % air flow . Provide 3 heavy duty steel butt hinges , lever door handle with privacy lock .

Connecticut

2026-05-05