Oil & Chip Seal Coat

2026-11-03

In - Place application ( form 944 ) ( 2 ) In - Place application of approximately 77 , 332 square yards of single application oil and chip seal coat . Asphalt shall be CRS - 2PM asphalt emulsion applied at a rate of . 4 gal / sq . yard . Distributor should be computer rate controlled with accuracy of plus or minus 5 % for determined application rate . Aggregate shall be washed 1 - B crushed quarry stone passing a 1 % wash test . Aggregate shall be applied at a rate of 18 - 22 lbs / sq yard . Chip spreader shall be capable of placing chips at a width of 20 feet in a single pass . Make , model , and serial number of chip spreaders proposed to be used shall be submitted on the schedule of prices page where indicated . Chip spreader shall be computer rate controlled and accurate to within 5 % of specified application rate . The contractor shall provide a minimum of two employees on the chip spreader for reasons of safety . Stone samples , grading report and wash test must be submitted to the township two weeks prior to the start of the project . This bid shall include all equipment , material , hauling , operators , laborers , traffic control , signs , and any and all items and personnel to perform and complete all work in accordance with standards set forth in Penn DOT publication 408 and additional specifications of the Township . Sweeping of all roads no more than three days prior to seal coat - is required . Sweeping with a pick - up type of street sweeper no more than two weeks after seal coat application is required . Traffic shall not be allowed at any time to come in contact with wet or uncured asphalt emulsion ( Contractor will be responsible for any damage incurred due to wet or uncured emulsions ). Contractor is responsible for traffic control . Scheduling must be approved by the Township Road master . All equipment shall be in good repair and appearance and be equipped with warning lights / devices . All workers shall be neat , professional , and able to perform their individual tasks . All workers shall be provided with safety equipment . Workers shall act in a courteous manner to the public and direct any problem or complaint to the Township Road master . Roads must be posted by contractor no less than 3 days in advance of work with signs stating , " ROAD TO BE OILED ". Roads must be posted by contractor on the day of work with signs stating , “ LOOSE GRAVEL " and shall remain posted until sweeping is completed

Pennsylvania

2026-05-09