ONE ( 1 ) NEW ALL - WHEEL DRIVE MOTOR GRADER

2026-11-03

Yes ____ No ____ Engine meets EPA Final Tier 4 and European Union Stage IV standards Yes ____ No ____ The engine shall have dual safety air cleaner elements , radial seal , dry type Yes ____ No ____ Engine shall be a turbo - charged , direct injection , four stroke , 6 - cylinder diesel engine with 4 valves per cylinder designed and built by the manufacturer Yes ____ No ____ Engine displacement for standard engine shall be no less than 9 . 0 liters ( 548 cu . in .) Yes ____ No ____ Unit shall be equipped with a Power Management System for variable horsepower with an operating range of 290 horsepower Yes ____ No ____ Ether starting aid shall be available and must automatically meter ether injection to prevent engine damage . Yes ____ No ____ Machine shall be equipped with electronic over - speed protection to prevent the engine and transmission from over speeding , as a standard feature . Yes ____ No ____ Electronic Throttle Control ( cruise control ) shall be available , and shall be controlled by a switch , located on the right - hand console for resuming and decreasing throttle set . Yes ____ No ____ Unit shall be equipped with engine stall prevention ( ESP } as standard equipment Yes ____ No ____ Engine will offer on - the - fly exhaust filter cleaning Yes ____ No ____ Engine will offer automatic de - rating Yes ____ No ____ Engine shall be rubber isolation mounted to reduce noise and vibration Yes ____ No ____ Engine will offer a lifetime viscous crankshaft damper Yes ____ No ____ An optional adjustable height engine pre - cleaner is available Yes ____ No ____ Coolant levels should be easily checked by an overflow tank Yes ____ No ____ The engine shall have an air - to - air after cooling for low engine speed lugging Yes ____ No ____ Unit shall have charged air cooler with restriction sensor and in - cab restriction warning light Yes ____ No ____ Engine fan shall automatically adjust fan speed via a variable displacement hydraulic fan pump to meet engine cooling requirements to minimize power demand from the engine , reduce vehicle noise levels , improve fuel economy , and improve vehicle performance . Yes ____ No ____ Engine power shall automatically compensate for power draw of the fan system to maintain a constant horsepower available to maintain vehicle performance independent of cooling system power draw . Such as that available on a CAT 160 class , or John Deere 872 class motorgrader .

Montana

2026-04-29