logo

Overlay and Chip Seal Hwy 312 Billings Area

Sector: Road • Location: Montana, United States of America

Source: Montana Purchasing Group

Tender
Closed

Contractor will provide all labor , equipment , materials , incidentals and traffic control necessary to produce , haul , place , tack and compact approximately 7 , 948 tons of ¾ ” Commercial Plant Mix Grade S PG58H - 34 asphalt mix material . The overlay shall be paved 0 . 15 feet thick and approximately 26 - 56 feet

Status
Closed
Sector
Road, Water Supply and Storage, Automotive, Commercial
Location
Montana, United States of America
Updated
3 Nov 2026
Source
Montana Purchasing Group

ConstructChat

Ask ConstructChat about Overlay and Chip Seal Hwy 312 Billings Area

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Tender Information FAQ

Tender Information

3 Q
The tender “Overlay and Chip Seal Hwy 312 Billings Area” is a tender record in Taiyo, linked to the Road sector. It is issued for works, goods, or services related to Montana, United States of America.

Participants

Not available for this record.

Status

Original status

closed

Taiyo status

Closed

Taiyo last update

2026-11-03

Contact

Not available for this record.

Description

Description

Contractor will provide all labor , equipment , materials , incidentals and traffic control necessary to produce , haul , place , tack and compact approximately 7 , 948 tons of ¾ ” Commercial Plant Mix Grade S PG58H - 34 asphalt mix material . The overlay shall be paved 0 . 15 feet thick and approximately 26 - 56 feet wide . Contractor shall provide all labor , equipment , materials , incidentals and traffic control necessary to produce , haul , place , roll and broom approximately 83 , 208 square yards of laid - in - place chip seal . The chip seal will be approximately 4 . 03 miles long and 26 - 56 feet wide . Contractor shall provide CRS - 2P asphalt emulsion and Type 1 chips . Traffic control with pilot cars must be maintained until dusk or fading light each work day as determined by the Project Manager . The emulsion application rate for chip seals is estimated at 0 . 42 gallons per square yard . The cover material application rate is estimated at 25 pounds per square yard . Actual application rates will be based on the chip design and the actual field adjustments . If the cover material application rate of 25 pounds per square yard is not sufficient to provide a quality job , the Project Managers will jointly determine what the new application rate should be . Contractor must furnish a water truck for dust control and wetting of chips . Arrangements must be made by the Contractor for acquiring water for wetting and sweeping . It will be the responsibility of the Contractor to determine the centerline and place reflective tabs prior to the chip seal . The Department will provide final striping . Contractor shall be responsible for all private property damage claims resulting from performance of the tasks described abov . Mobilization L . S . 1 . 0 ¾ ” Commercial Plant Mix - Grade PG 58H - 34 Ton 7 , 948 . 0 Cold Milling ( avg . depth 0 . 15 ’) S . Y . 2 , 000 . 0 Type 1 Chips S . Y . 83 , 208 . 0 Liquid Emulsified Asphalt Grade CRS - 2P Ton 148 . 0 Traffic Control L . S . 1 . 0

Location

Country

United States of America (USA)

State

Montana

Source

Source

Montana Purchasing Group

URL

More Details

Record type

Tender

Sector

Road, Water Supply and Storage, Automotive, Commercial

Article published date

2026-04-29

More on this tender

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this tender
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this tender