Provide and Install Vinyl Wrap for Semi Trailer

2026-11-03

The Contractor shall remove the existing vinyl graphics from the rear doors of the trailer and furnish and install new vinyl graphics on both side panels and the rear doors of the trailer in accordance with the artwork provided by the College and included in the bid documents . The trailer will be made available to the selected Contractor beginning May 4 . Trailer is a 53 feet long . Scope of Work The Contractor shall provide all labor , materials , equipment , tools , supervision , and incidentals necessary to complete the Work , including but not limited to the following : 1 . Removal Removal and proper disposal of all existing vinyl graphics from the rear doors of the trailer . 2 . Surface Preparation Complete surface preparation as required to ensure proper adhesion and finish quality of the new vinyl installation . All preparation costs , including labor , cleaning agents , surface repairs ( if required ), materials , and equipment , shall be included in the Contractor ’ s bid . 3 . Installation Furnish and install full - color printed vinyl wrap on both sides and the rear doors of the semi - trailer . The front of the trailer and trailer skirt are specifically excluded from this Scope of Work . Installation shall be performed in strict accordance with manufacturer specifications and industry best practices . 4 . Materials Specifications Vinyl material shall be outdoor - rated , high - performance cast wrap material meeting the following minimum specifications : • 2 – 3 mil High Performance Cast Wrap film • 2 – 3 mil Cast UV Overlaminate • 7 – 10 year outdoor durability rating Graphics shall be full - color printed .

Utah

2026-05-02