Pruning to ensure the visibility of the Petite Traverse range

2026-11-03

Summary One of the Canadian Coast Guard’s (CCG) mandates is to establish, maintain and operate a network of aids to navigation to allow mariners to safely navigate Canadian waters. These aids must be visible at all times. To ensure the visibility of these aids, we did field surveys to establish a corridor within which vertical non-obstruction clearance is required. This corridor allows us to accurately identify any obstacles. The purpose of this work is to clear the visibility corridor and improve marine safety in the Contrecoeur area. Description of work required The contractor must prune the trees located in the non-obstruction corridors to improve visibility of the the above-mentioned range shown in Appendix A. These trees, which are identified with tape, are of various species and sizes. They must be pruned in accordance with the cutting height depending on their location, in the visibility corridor (361 total). The cutting heights is 12 m above ground level. The geographic coordinates, sectors, tree species and cutting heights, are illustrated in detail on plan No. QE35330-35320-A01-CL-ENG in Appendix B and listed in the table included in Appendix C. Refer to the RFP document for full Statement of Work. Mandatory Site Visit A mandatory site visit will take place on Friday November 14, 2025, at 9:30 a.m Eastern Standard Time (EST). A representative of the Canadian Coast Guard (CCG) will meet you across from 7740 Route Marie-Victorin, Contrecoeur, QC J0L 1C0 (45°54'43.3"N, 73°12'29.0"W). All persons wishing to submit a bid must attend this site meeting in order to fully understand the scope of the work and the requirements of the bid. The bidder's representative must sign an attendance sheet and participate in the entire site visit for the bid to be considered valid. Bidders must contact the procurement officer by email at Stephanie.Patry@dfo-mpo.gc.ca and copy DFO.tenders-soumissions.MPO@dfo-mpo.gc.ca no later than Thursday, November 13, 2025 at 2:00 p.m EST. to confirm their attendance and provide the following information: 1. Company name 2. Company address 3. Company phone number 4. Name of the bidder's representative, with email address and phone number The bidder's representative will be required to sign the attendance sheet during the site visit. Bids submitted by bidders who have not signed the attendance sheet will not be accepted. Bidders should confirm in their bid that they have attended the site visit. Bidders who do not attend the mandatory site visit or who do not send a representative will not be given another appointment and their bid will be declared inadmissible. Bidders who do not confirm their attendance and who do not provide the above information will not be given access to the site. No other appointments will be granted to bidders who do not show up or who do not send a representative. The bidder's representative must sign the attendance sheet during the site visit. Any clarifications or amendments to the request for proposals following the site visit will be included in an addendum to the RFP. Period of the Contract The period of the Contract is from Contract award until February 20, 2026. Security No Security clearance required, escort required at DFO sites, except for public zones. Trade Agreements The requirement is subject to the Canada-Chile Free Trade Agreement (CCFTA), Canada-Colombia Free Trade Agreement, Canada-Panama Free Trade Agreement, Canada-Korea Free Trade Agreement (CKFTA), Canada-Honduras Free Trade Agreement, and the Canadian Free Trade Agreement (CFTA). Mandatory Requirements Proposals will be evaluated in accordance with the mandatory evaluation criteria as detailed herein. Bidders’ Proposals must clearly demonstrate that they meet all Mandatory Requirements for the proposal to be considered for further evaluation. Proposals not meeting the mandatory criteria will be excluded from further consideration. Mandatory Criteria M1 The contractor must provide a copy of valid first aid certificate for each person in charge at the site. A minimum of one (1) person must be proposed. (First aid.) M2 The contractor must demonstrate that they are qualified to perform the pruning work (member of a recognized pruning or arboriculture association [SIAQ, ASCA], recognized professional, college or university training in arboriculture and/or forestry). The contractor must include a copy of the diploma or certificate with their proposal. M3 The contractor must demonstrate in their bid that they have worked on a project of similar scope within the last 72 months. A similar project must include both of the following: 1. Pruning at heights of 300 trees or more 2. Work requiring 4 or more people on site at the same time The project description must include the project start and end dates and a brief description meeting the 2 criteria. Comprehensive Land Claim Agreements This procurement is not subject to any Comprehensive Land Claims Agreement Selection Method The basis of selection is: Mandatory Criteria – Lowest Responsive Evaluated Price.

Canada

2025-11-11