Purchase 2026 Backyard Hydraulic Digger Derrick with Transport Trailer

2026-11-03

Hydraulically track driven with skid steer activation steering with hydraulic width track adjustment to allow machine to pass through a 36 ” gate opening Rubber tracks are to be made out of the non - marring grey color type Hydraulic radial outriggers with holding valves and motion alarms Minimum 3 , 800 pound boom lifting capacity all cylinders to have integral holding valves Minimum sheave height of 38 ’ One ( 1 ) 8 ’ insulated material handling jib with mounting hardware One ( 1 ) 4 ’ insulated personal jib with mounting hardware Ability to perform simultaneous material handling functions with the bucket attached to the end of the boom 300 # capacity pin on 24 ” x 24 ” x 42 ” bucket with bucket brake , inside outside step and cover – NO liner Pin on hydraulically actuated tilt and open / close removeable pole guides at boom tip with boom tip flares 46KV category C boom with ½ ” material handling rope for the rated capacity with hook and down haul weight 2 , 500 foot - pound single speed fully proportional digger with an 18 ” auger with carbide teeth and a 2 ” Kelly bar . Auger to stow on side of boom Auger attachment to be transferrable from main boom to the end of 2nd stage without disconnecting hoses Hydraulic tool circuit at boom tip and below rotation on engine compartment and at the front of machine with an optional hydraulic removable hose reel that will pin to the front 2 ” receiver hitch . All tool circuit quick couplers are to be 3 / 8 ” Parker NS - 0371 - 6FP and NS - 372 - 6FP no - spill couplers at the boom tip . The control valve shall not cause a hydraulic “ lock ” at couplers when used Hose reel and tool circuit below rotation is to be a spring loaded hose reel with 35 ’ of ½ ” hose for pressure and return circuits . Included Parker ½ ” quick couplers # NS - 501 - 8FP and NS - 502 - 8FP on ends with the male end delivering the pressure oil for operating tamp and other tools Hydraulic extended fiberglass 3rd section boom Hydraulic overload protection ( HOP ) for all boom functions and electronic side load protection for rotation Boom and auger stow protection system 360 ° continuous boom rotation Wireless remote control for all boom functions with a platform docking station . operator ’ s harness for remote with machine mounted remote battery charger Remote functions to operate unit ’ s drive system and retractable tracks , radio remote and hard wired Lower control station to include hydraulic gauges , engine tachometer , hour meter and all engine warning lights Lower controls at rear of machine for all boom and drive functions

Nebraska

2026-04-29