Rectangular Gable Pavillion Kit

2026-11-03

Material Specifications for Pavillion Structure • A new 20 ' x 34 ' shade structure ( or nearest standard - sized structure based on manufacturer ) is preferred . • The pavilion shall be a gable - style rectangular structure with an 8 ' eave height . All steel structural components must be as follows : o Hollow tubing to be A500 structural steel o Columns to be a minimum 3 / 16 " wall thickness o Base plate to be a minimum ¾ " thick A36 steel • All columns to be surface mount . Concrete anchors to be included and must meet OSHA Steel Erection Standard 29 CFR 1926 . 755 ( a )( 1 ). • All fasteners to be A325 or A563 structural grade , galvanized , hidden or color matched . • All fasteners must be able to be completely sealed inside tubing . • All bolts included in the engineer - stamped design must be installed . No open holes will be allowed . • Structure must require no on - site welding . • All steel must be shotblasted to near white before painting . Steel components must be rich epoxy primed to . 7 -. 9 mil thickness then powder coated with TGIC polyester powder to minimum final thickness of 8 to 12 mils including the clear coat . Color to be : GRAY . • Roof to have a 4 / 12 pitch . • Roof to be 24 gauge standing seam metal panels . Roof color must be MATTE BLACK . Standing seam roof surface must be coated with Kynar 500 . Roof trim including fascia wrap must be a minimum of 24 gauge galvalume metal , color matched to roof , and Kynar 500 coated . • The subroof / ceiling to be 2x6 tongue and groove # 1 SYP wood plank . • Pavilion shall not include guttering or downspouts

Missouri

2026-04-29