Recycling Truck
Sector: Road • Location: Arkansas, United States of America
Source: Arkansas Purchasing Group
1 . Four ( 4 ) container trough loaded side dump recycling body . 2 . Material - Troughs , containers , and hoist assembly to be of steel construction . 3 . Each container is to have an independent trough that is used to load that individual container . 4 . Current model production new unit . ( Demo or prototypes ar
- Status
- Closed
- Sector
- Road, Steel
- Location
- Arkansas, United States of America
- Updated
- 3 Nov 2026
- Source
- Arkansas Purchasing Group
ConstructChat
Ask ConstructChat about Recycling Truck
Pick a question to edit it, or write your own.
First answer free · no account
Tender Information FAQ
Tender Information
Participants
| Not available for this record. |
Status
Original status | closed |
Taiyo status | Closed |
Taiyo last update | 2026-11-03 |
Contact
| Not available for this record. |
Description
Description | 1 . Four ( 4 ) container trough loaded side dump recycling body . 2 . Material - Troughs , containers , and hoist assembly to be of steel construction . 3 . Each container is to have an independent trough that is used to load that individual container . 4 . Current model production new unit . ( Demo or prototypes are unacceptable . 5 . Bin Size and Arrangement - Yards Capacity 500 Compactor 10 . 2 cu yd 7 . 75 cu yd 2 - way split 20 . 0 cy yd ( Five ( 5 ) Separate Compartments ) 6 . Front Compactor - The compactor ram face width shall be 37 . 5 " with a stroke of 36 " and have penetration of 8 " into the receiving container . Loading shall be from the curbside into a trough with a loading height of no more than 38 " based on a frame height of 40 ". The cycle time shall be 14 seconds . With a compaction ratio of 8 : 1 , the approximate uncompacted volume shall be no less than 20 . 0 cubic yards . Normal operating pressure shall be 1800 PSI with a maximum pressure of 2200 PSI . When the underbody hoist is elevated to its maximum dump height of 84 " on a 40 " frame , it shall achieve a 35 " side offset and a 50 ° dump angle . An auto cycle feature is standard to allow for continual compaction on the route . |
Location
Country | United States of America (USA) |
State | Arkansas |
Source
Source | Arkansas Purchasing Group |
URL |
More Details
Record type | Tender |
Sector | Road, Steel |
Article published date | 2026-03-27 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this tender
- News and media coverage
- Technical research
Free account · no card · lands you back on this tender