Reflective Sign Sheeting

2026-11-03

General Requirements : Contract Items and Mandatory Requirements : Vendor shall provide WVPA with the Contract Items listed below on an open - end , continuing basis . Contract Items must meet or exceed the mandatory requirements as shown below . The specifications of this RFQ and / or any WVDOH Standards referenced in and / or attached to this RFQ may include references to specific recognized " industry standard " specifications which are issued by third parties , such as the American Society for Testing and Materials ( ASTM ) and the American Association of State and Highway Transportation Officials ( AASHTO ). Such specifications are protected by strict copyright restrictions and cannot be published as part of this RFQ . The ability to access such specifications shall be considered a mandatory requirement for participation in the RFQ process as a Vendor or as a supplier to the Vendor , as applicable . Contract Items : The following Contract items are listed on the Pricing Pages . Type ASTM - XI Retroreflective Sheeting The reflective sheeting material supplied under this Section shall be listed on the APL . The reflective sheeting material and the manufacturer recommended matched components ( transparent film , opaque film ) for use with the supplied reflective sheeting must all be approved by the WVPA for manufacturing purposes within the CSS . Type ASTM - XI Retroreflective Sheeting Matched Components Transparent and opaque matched component films for use with the reflective sheeting provided under Section 3 . 1 . 1 . 1 . The films supplied under this Section shall be the manufacturer recommended films for use with the reflective sheeting provided under Section 3 . 1 . 1 . 1 . The manufacturer of the material supplied under this Section shall be the same manufacturer whose material is supplied under Section 3 . 1 . 1 . 1 Slip Sheeting : This requirement shall apply with the exception of 12 - 3 / 4 inch reflective sheeting and nominal roll widths of sheeting less than 12 inches . The Vendor shall supply slip sheeting equal in width to each different width ( nominal ) reflective sheeting material ordered under these Sections . The total length of each width supplied shall be at least equal to the total length of each width of reflective sheeting ordered under these Sections . All slip sheeting shall be supplied in roll form . The slip sheeting shall be compatible with the sheeting manufacturer ’ s reflective sheeting material and matched components . The minimum total length of each width of slip sheeting required to be supplied shall be indicated by the purchasing Agency on the Release Order .

West Virginia

2026-05-02