Roofing - Various Sites

2026-11-03

Work Included : A . Remove existing low and steep slope roofing systems , walkways , base flashings , patches , repairs , and insulation down to plywood roof decks at locations indicated on drawings and dispose of offsite . B . Removal of existing sheet metal flashing elements where indicated on drawings or where required to remove existing roofing and to install new roofing system in compliance with manufacturer requirements based on required manufacturer warranty . Dispose of , or store flashings for reinstallation as indicated on project drawings . Modify existing flashings as indicated on drawings to allow for proper installation of new roofing system . Install new sheet metal skirt flashings to match composition of existing flashings with drip edge . Secure in place with new fasteners of matching metal composition . C . Remove and dispose of all unused or abandoned equipment at roof areas as indicated on drawings . D . Replace all damaged or defective plywood panels as directed by CUSD representative or its consultant . The Base Bid shall include labor and material to replace up to One Hundred and Fifteen ( 115 ) damaged or defective ( 4 ’ x 8 ’ CDX ) plywood roof panels of equal thickness cumulatively for all sites . At completion of project , contractor shall credit CUSD for any unused labor and material for replacement or plywood in the event fewer than specified number of panels are replaced . Credit shall be based on Unit Cost per panel as included on Bid Form ( Section 00400 ). E . Contractor to provide Unit Cost for replacement of one ( 1 ) additional damaged or defective ( 4 ’ x 8 ’) plywood roof panel of equal thickness in the event plywood total exceeds the quantity included in the Base Bid . Cost to include all labor and material . Materials and installation shall comply with specifications and code requirements .

California

2026-03-27