Scrub Seal Main St East C56788 Billings Area

2026-11-03

The Montana Department of Transportation ( MDT ) is accepting bids for Scrub Seal Main St East C56788 Billings Area . PROJECT SITE : MAIN ST EAST ROUTE : C56788 MILEPOST : 0 . 0 – 2 . 52 AVERAGE ROADWAY WIDTH : 65 FEET SPECIFICATIONS FOR WORK : Contractor shall provide all labor , equipment , materials , incidentals and traffic control necessary to produce , haul , place , roll and broom approximately 93 , 070 square yards of laid - in - place scrub seal . The scrub seal will be approximately 2 . 52 miles long and 65 feet wide . Contractor shall provide PMRE ( Polymer Modified rejuvenating Emulsion ) and Type 1 chips . Traffic control with pilot cars must be maintained until dusk or fading light each work day as determined by the Project Manager . Contractor must provide enough pilot cars to keep traffic stops to a maximum of 15 minutes . Prior to emulsion application , Contractor must ensure roadway is clean and free of debris . All cracks must be dry and blown free of debris to allow emulsion to adhere to the existing crack walls . The emulsion application rate for scrub seals is estimated at . 45 gallons per square yard . Following application of the emulsion , use a scrub broom to force the emulsion into the existing surface . The cover material application rate is estimated at 25 pounds per square yard . Actual application rates will be based on the scrub design and the actual field adjustments . If the cover material application rate of 25 pounds per square yard is not sufficient to provide a quality job , the Project Managers will jointly determine what the new application rate should be . Contractor must furnish a water truck for dust control and wetting of chips . Arrangements must be made by the Contractor for acquiring water for wetting and sweeping .

Montana

2026-04-29