Senior Center Storage Building / Dumpster Enclosure

2026-11-03

BID ITEMS # 1 : Construction of a 14 '- 0 " x 20 '- 0 " wood framed storage building . • Demo and dispose of existing asphalt paving , as required , for new structure • Compact existing baserock , and add additional base material as required for pad • Excavate and pour for assumed 2 '- 0 " x 2 '- 0 " continuous grade beam footings at perimeter • Form and pour 8 " x 24 " continuous concrete stem wall at perimeter of building • Form and pour 4 " 3500 - PSI , Welded - Wire Fabric reinforced concrete slab - on - grade , troweled finish • Wood framed wall construction assumed to be 2x4x9 ' walls , wood sheathing w / vapor barrier • R - 13 batt insulation at the walls and ceiling • Wood sheathing at interior walls and ceiling • Wood framed roof structure , wood decking , papered , and a metal roof to match the roof on the existing building • Walls to be painted to match the walls on the existing building ( paint code PPG - Whirlwind ) ( Trim – Custom match to Burnished Slate Roof ) • All necessary fascias , soffits , drip edge , gutter and downspouts • Brick veneer with wood siding painted to match existing building • One ( 1 ) 6 '- 0 " x 8 '- 0 " insulated , manually operated , sectional door • Concrete shall be patched back around building where asphalt was removed for clean transition ; BID ITEM # 2 : Construction of a 12 '- 0 " wide x 10 '- 0 " deep x 8 '- 0 " high dumpster enclosure . • Demo and dispose of existing asphalt paving and subgrade , as required • Place and compact baserock material , as required for pad • Excavate and pour for assumed 2 '- 0 " x 2 '- 0 " continuous grade beam footings at perimeter • Furnish and install five ( 5 ) 6 " steel pipe bollards , concrete filled and painted • Form and pour 8 " 4000 - PSI , Welded - Wire Fabric reinforced concrete slab - on - grade , broom finished • Split face concrete masonry units ( CMU ) walls shall be constructed 8 '- 0 " high with a cap block on the back and sides ( color to be determined by Owner ) • Fabricate and install two approx . 6 '- 0 " steel framed dumpster gates mounted to steel pipe , with all hardware and cane bolts • Install metal r - panel over the gate frames , including all trims for complete installation • Final clean up and repair of any damaged pavement in area of work

Missouri

2026-04-29