Sideload Containers

2026-11-03

SIDELOAD 3 - YARD CONTAINERS : 1 . 180 - 3 - yard EMCO style lift system containers 2 . Body of the containers shall be 12 - gauge steel 3 . The containers shall be 100 % welded ( inside or outside ) 4 . The three yard ( 3 yd ) containers shall have a three ( 3 ) piece lid system and the rear section shall be 16 gauge metal with two ( 2 ) poly front lids each . 5 . The two ( 2 ) poly lids shall not be more than 1 / 2 of the opening of the entire 6 . 7 . container . The poly lids shall extend not less than one inch ( 1 ") past the front edge of the container , but not more than 1 1 / 2 " past the front edge of the container . The Emco style metal hooks on the container shall be a minimum of one - half inch ( 1 / 2 ") thick All poly lids shall be manufactured to withstand at least their own weight without the need for support brackets . If a rod system is used to attach the lids to the container , slots will not be accepted in the brackets . ( Single hole only .) 8 . Containers shall have one and one half inch ( 1 - 1 / 2 ") drain plug 9 . Containers shall be primed and painted FOREST GREEN in color 10 . Inside bottom and six inches ( 6 ") up all sides shall be treated with an additional corrosion resistant material 11 . Lift assembly shall be welded ten inches ( 10 ") from the top opening of the container to the top of the lift assembly ( see attachment 1 ) 12 . Lids installed by the City of Garden City 13 . City of Garden City shall unload containers 14 All material needed to assemble containers completely shall be included with delivery of Containers

Kansas

2026-04-08