Signals Compartmentalized Body with 40 ’ Aerial Lift

2026-11-03

TRUCK CHASSIS The truck chassis and cab shall be furnished by the City of Omaha and dropped shipped to the successful bidder . Delivery of completed unit will be the responsibility of the successful bidder . Truck chassis shall be Ford F - 550 19 , 500 GVW 60 ” CA 167 ” WB Truck chassis shall be dual rear wheels . Will have an automatic transmission and gas engine . Will be four - wheel drive SERVICE BODY Service body shall be fabricated from steel . Body to have structural steel channel understructure , fully welded throughout , checkered type floor plate , heavy duty double paneled doors with spring loaded latches and keyed locks . Bidders are to supply full details of materials to be furnished with bid . Body to be painted WHITE . Exterior floor and bumper to be coated with sprayed on polyurethane slip resistant Rhino liner or equivalent . Fuel fill : Aluminum or Stainless - Steel fill cup and tethered fuel cap . Body Specifications : Overall Length : 108 ” Overall Width : 94 ” Floor Width : 54 ” Compartmentation : Left Side L1 33 ” x40 ” L2 50 ” x24 ” L3 27 ” x40 ” Right Side R1 33 ” x40 ” R2 50 ” x24 ” R3 27 ” x40 ” REAR STEPS To have a step entry to the body / boom on the curbside rear tailboard area . To have a storage compartment built into the step area extending the full width of the body . Shall have a tail shelf to extend a maximum of three feet beyond the rear of the body with an ICC bumper . Construction Body 14 - gauge galvanized steel Floor ⅛ ” tread plate steel Electrostatic primer 6 Year rust out warranty Service body to be undercoated MOUNTING Mounting of Service Body and components on the City of Omaha furnished truck chassis shall be accomplished by the successful bidder , cost of which shall not be paid for directly but shall be considered incidental to the bid price . Truck frame flanges shall not be welded for mounting of service body unit to truck frame . All mounting bolts shall be heat treated grade eight ( 8 ) minimum and all mounting holes shall be drilled . All bolts used for manufacture and mounting shall meet S . A . E . J429 specifications . If body weight requires additional springs to level the load , it will be required that the vendor meet these needs .

Nebraska

2026-04-29