logo

Solar Powered Radar Speed Limit Signs Project

One of 1,967 tenders Taiyo tracks in Vermont.

Source: Vermont Purchasing Group

Tender
Closed

Town of Mendon , VT US Route 4 Mendon Village Solar Powered Radar Speed Limit Signs Project The Town of Mendon seeks to have a radar speed limit feedback sign installed on US Route 4 located on the East and West ends of the Village of Mendon , Vermont . These signs will be installed with a sola

Status
Closed
Sector
Solar, Cement, Energy Storage, Automotive, Bridge, Road, Power Generation (CCGT)
Location
Vermont, United States of America
Updated
3 Nov 2026
Source
Vermont Purchasing Group

ConstructChat

Ask ConstructChat about Solar Powered Radar Speed Limit Signs Project

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Tender Information FAQ

Tender Information

3 Q
The tender “Solar Powered Radar Speed Limit Signs Project” is a tender record in Taiyo, linked to the Solar sector. It is issued for works, goods, or services related to Vermont, United States of America.

Participants

Not available for this record.

Status

Original status

closed

Taiyo status

Closed

Taiyo last update

2026-11-03

Contact

Not available for this record.

Description

Description

Town of Mendon , VT US Route 4 Mendon Village Solar Powered Radar Speed Limit Signs Project The Town of Mendon seeks to have a radar speed limit feedback sign installed on US Route 4 located on the East and West ends of the Village of Mendon , Vermont . These signs will be installed with a solar battery to power it . The intention is to create a safer community by giving drivers a visual cue to reduce their speed on the road . Before installing the Driver Feedback Sign , an installation site must be selected . It is very important to select a site with the following characteristics : Pre - Install There must be a clear view of the sign from the roadway for at least 500 feet , and the viewing area must be clear of trees . Attenuation of the radar ’ s signal , caused by trees , may reduce the radar ’ s effective range . Do not install the sign facing an intersection or bridge if possible . If the sign must be installed facing an intersection or bridge , the sign should be located at least 400 feet away . Cross - traffic may be registered by the radar as an oncoming vehicle . The sign should be located at least 200 feet away from large street signs that fall within the radar ’ s detection zone and cause the radar to reflect its ’ output . Reflecting the radar ’ s output by objects such as signs may cause vehicles to be detected in the opposite direction . Install sign in roadway geometries that allow clear view of the sign ’ s display and provide the most efficient radar detection zone . Proper site selection will provide the greatest traffic calming effect and sign performance . Using Class B concrete ( 3000psi ), the concrete footing will be installed to a depth of 4 ’ ( FOUR FEET ) and width of 2 ’ ( TWO FEET ). The are 4 anchor bolts that are secured in the footing along with a flexible conduit to run a # 6 grounding wire to a ground rod . The ground wire will be attached to the ground rod using an exothermic weld . There will be 4 # 6 Bars 5 ” shorter than the footing height .

Location

Country

United States of America (USA)

State

Vermont

Source

Source

Vermont Purchasing Group

URL

More Details

Record type

Tender

Sector

Solar, Cement, Energy Storage, Automotive, Bridge, Road, Power Generation (CCGT)

Article published date

2026-04-28

More on this tender

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this tender
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this tender