Sole Source Notice Of Intent - Window Fabrication For Erdc Gsl

special notice

Closed

The U.S. Army Corps of Engineers Research and Development Center (ERDC), Geotechnical and Structures Laboratory (GSL) intends to issue a Firm Fixed Price (FFP) sole source award to Physical Security, LLC (CAGE: 4MAJ3 / UEI: N828XLEASQN9) for four (4) type W-1 full size historic replication windows manufactured exclusively by Physical Security, LLC. The Structural Mechanics Branch (SMB) of the Geotechnical and Structures Laboratory (GSL) of the US Army Engineer Research and Development Center (ERDC) is conducting testing for the Pentagon Engineering and Architecture Division and requires type W-1 full-sized windows representative of those fielded in DoW maintained structures. The original windows installed at the Pentagon were designed, fabricated, and installed by Physical Security, LLC. The manufacturing process, developed exclusively by Physical Security, LLC, is critical to the performance of the window and test results. Therefore, while other vendors may be able to manufacture windows with similar materials and properties, their process and materials may differ slightly. In addition, the quality control may not be the same as that of Physical Security, LLC, causing skewed and incorrect research results resulting in mission failure by the ERDC and a potential loss of life for DOW employees involved in any future attacks on the Pentagon. To meet the ERDC GSL’s requirement, it is essential that the testing involve accurately replicated historic window types currently installed at the Pentagon that can only be provided by Physical Security, LLC. As a result, Physical Security, LLC is the only known vendor who can provide the four (4) type W-1 full size historic replication windows. The award will be issued in accordance with FAR 13.500. The applicable North American Industrial Classification System Code (NAICS) code is 332321, Metal Window and Door Manufacturing, with a size standard of 750 employees. This notice of intent is for information purposes only. This notice is not a request for competitive quotes or proposals. A solicitation will not be issued. However, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The information submitted must be provided in sufficient detail to demonstrate the vendor’s ability to fulfill this requirement. The contractor must also provide a description of their past experience in fulfilling requirements which are the same or similar to this requirement and references for each. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this requirement on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. Responses to this requirement may be submitted to Angie Stokes at Anglea.M.Stokes@usace.army.mil and David Ammermann at David.G.Ammermann@usace.army.mil. The solicitation number shall be included in the subject line of the e-mail submission. Responses must be received no later than 1:00PM CST 10 February 2026.

United States of America (USA)

Mississippi

SAM.gov

Tender

Residential, Aerospace & Defense, Manufacturing (Industrial), Metal, Commercial, Government