South Shore Pump Station Rehabilitation Phase 1

2026-11-03

A . 2 . 1 Base Bid – Phase One The Contractor shall furnish all labor , materials , equipment , and incidentals necessary to perform the Base Bid at each pump station . This work shall include the following tasks : o Remove and dispose of existing wet - well piping , valves , modular sealing assembly , and supports . o Furnish and install new 4 - inch cement - lined ductile iron piping , valves , fittings , modular sealing assembly , and supports as shown on the drawings . o Provide and install all required gaskets , bolts , and flanges rated for wastewater service . o Conduct work in compliance with permit - required confined space entry standards . o Provide bypass pumping to maintain continuous station operation . Refer to Section F . 14 Sewage Bypass and Excess Sewage Removal Plan . o Perform hydrostatic and leak testing to verify system integrity , as outlined in Section A . 5 . 2 . o Submit testing documentation to the Town for approval . o Clean work area and restore all surfaces and equipment disturbed during installation to preconstruction condition . o Remove debris and waste materials from the site . A . 2 . 2 Alternate Bid No . 1 – Replacement of 4 - inch , 3 - Way Plug Valve Under this Alternate , the Contractor shall furnish all labor , materials , equipment , and incidentals necessary to remove and replace one ( 1 ) existing 4 - inch , 3 - way plug valves located within the valve pit at each pump station ...

Connecticut

2026-03-27