Split Butterfly Valve for Powder Transfer Applications
One of 10,000+ tenders Taiyo tracks in United Kingdom.
Source: Open Contracting Data Standard (OCDS)
UKNNL are seeking expressions of interest from suppliers capable of providing a split butterfly valve system suitable for powder handling and transfer operations. Minimum Technical Requirements • Be suitable for the transfer of powders and quick-connect/disconnect operations. • Accommodate connections in the region of: -100 mm to 50 mm diameter, or -100 mm to 80 mm diameter to minimise the potenti
- Status
- Prospective
- Sector
- Chemical (Industrial), Steel
- Location
- United Kingdom
- Updated
- 3 Nov 2026
- Source
- Open Contracting Data Standard (OCDS)
ConstructChat
Ask ConstructChat about Split Butterfly Valve for Powder Transfer Applications
Pick a question to edit it, or write your own.
First answer free · no account
Tender Information FAQ
Tender Information
Participants
| Not available for this record. |
Status
Original status | planning |
Taiyo status | Prospective |
Taiyo last update | 2026-11-03 |
Contact
| Not available for this record. |
Description
Description | UKNNL are seeking expressions of interest from suppliers capable of providing a split butterfly valve system suitable for powder handling and transfer operations. Minimum Technical Requirements • Be suitable for the transfer of powders and quick-connect/disconnect operations. • Accommodate connections in the region of: -100 mm to 50 mm diameter, or -100 mm to 80 mm diameter to minimise the potential for product blockage. • Be compatible with hydrofluoric acid (HF Resistant) at concentrations of approximately 25-50% by mass. • Be suitable for operating temperatures up to approximately 300°C. • Be suitable for operating pressures from full vacuum to approximately 3 barg. Additional Information • An integrated vacuum system for removal of powder from between split butterfly valve faces is not required. • Alternative materials of construction may be considered such as stainless steel. • Particular attention should be given to the suitability and chemical resistance of sealing materials for hydrofluoric acid service. • Sealing materials must be suitable for hydrofluoric acid (HF) at the specified process concentrations. |
Location
Country | United Kingdom (UK) |
Source
Source | Open Contracting Data Standard (OCDS) |
URL |
More Details
Record type | Tender |
Sector | Chemical (Industrial), Steel |
Article published date | 2026-11-02 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this tender
- News and media coverage
- Technical research
Free account · no card · lands you back on this tender
More Chemical (Industrial) tenders in United Kingdom
- Laboratory Chemicals and Consumables Framework 2026
- Chemical Testing for Northern Ireland Lot 3
- Collection of Chemical Waste and Paints (Hazardous and Non-Hazardous)
- Lit Review: Cyanobacterial toxins in fish arising from cyanobacterial bloom
- Polymerase Chain Reaction (PCR) Equipment
- PO/2026/1123/AW
- Molecular Analysis of Water Primrose (Ludwigia)
- Preliminary Market Engagement for Continence Care Products on behalf of Health and Social Care (HSC) in Northern Ireland (the Buyers)