Submersible Non - Clog Wastewater Pumps

2026-11-03

Line Ref # DETAILED REQUIREMENTS Compliant ? Yes No 1 . 0 GENERAL SYSTEM DESCRIPTIONS 1 A . Supply one ( 1 ) non - clog submersible wastewater pump , adapter bracket if needed and associated equipment for the Lift Stations as shown in Appendix C , capable of handling raw , unscreened sewage and meeting the performance requirements for each station : See Appendix C for duty points . 2 Manufacturers : Subject to compliance with requirements , provide products by one of the following : SULZER Flygt Approved Equal 3 Each motor shall be supplied with forty - nine ( 49 ) feet of properly sized electric submersible cable sized in accordance with NEC & CSA standards . 4 The pump , with its appurtenances and cable , shall be capable of continuous submergence underwater without loss of watertight integrity to a depth of sixty - five ( 65 ) feet . 5 Each pump shall be fitted with stainless - steel lifting chain . 6 Referenced Standards : American Iron & Steel Institute ( AISI ) American Society for Testing and Materials ( ASTM ) Factory Mutual ( FM ) Hydraulic Institute Standards for Centrifugal , Rotary , and Recip . Pumps ( HI ) National Fire Protection Association ( NFPA ) National Electric Code ( NEC ) National Electrical Manufacturers Association ( NEMA ) Anti - Friction Bearing Manufacturers Association ( AFBMA ) 1 . 1 PUMP WARRANTY 7 The pump manufacturer shall warrant the pump and motor to the Owner against defects in workmanship and materials for a period of five ( 5 ) years ( parts and labor ) under normal use and service for municipal wastewater applications . Warranty shall not be limited to hours .

Alabama

2026-03-27