Surface Grinder

2026-11-03

Surface Grinder : Features & Specification : 2hp Motor , Two “ V ” ways for extra accuracy in cross travel , Both ways are hand - scraped and covered with Turcite B coating , Accurate slot grinding achieved using a saddle locking system , Double - nut backlash eliminator , Cross slide and column screws are hardened and ground to a 70 Rockwell C Hardness , Wire rope - driven table , Main spindle run out within 0 . 0001 ”, Automatic lubrication system , Maximum Grinding Length 18 . 5 ”, Maximum Grinding Width 6 . 3 ”, Maximum Distance – Table to Spindle Center 16 ”, Working Surface ( W x L ) 6 ” x 18 . 3 ”, Maximum Longitudinal Travel 18 . 9 ”, Maximum Cross Travel 7 ”, Hand Feed per Revolution ( Longitudinal Table ) 4 . 2 ”, Hand Feed per Revolution ( Cross Saddle ) 0 . 2 ”, Graduation of Cross Hand Wheel 0 . 001 ”, Vertical Hand Feed per Revolution 0 . 05 ”, Graduation of Vertical Hand Wheel 0 . 0001 ”, Spindle Motor 2 HP , Spindle Speed 3 , 600 rpm , Grinding Wheel OD 8 ”, Grinding Wheel Bore 1 . 25 ”, Grinding Wheel Width 0 . 63 ”, Total Power Consumption 220V , 1 . 5KVA / 4 amps Standard Equipment : Grinding Wheel ( 8 ” x 0 . 63 ” x 1 . 25 ”), 6x18 Kanetsu Permanent Magnetic Chuck , Auto Lube System , Wheel Adapter / Flange , Wheel Balancing Arbor , Work Light , Diamond Dresser , Tool Kit ( Machine Manual , Half Nut Wrench , Wrench 17mm , Wrench 19mm , Set of 6 Allen Wrenches , Phillips Screwdriver , Oil Can , Grease Gun , Rear Way Cover Bracket , Pin for Indicator , Can of Paint )

Alabama

2026-03-27